UK Vintage Radio Repair and Restoration Powered By Google Custom Search Vintage Radio Service Data

Go Back   UK Vintage Radio Repair and Restoration Discussion Forum > Specific Vintage Equipment > Vintage Audio (record players, hi-fi etc)


Vintage Audio (record players, hi-fi etc) Amplifiers, speakers, gramophones and other audio equipment.

Thread Tools
Old 2nd Aug 2020, 5:22 pm   #1
Join Date: Jun 2020
Location: Exeter, Devonshire, UK.
Posts: 8
Default BSR C129 (?) autochanger

As far as I can tell, this is a C129, autochanger.

My problem is that, the plastic 'Record Size Selector' operating arm, has disengaged from the Record Size Selector mechanism. I have removed the size selector mechanism unit, from the chassis and replaced the arm, where it appears to have lived previously; but it is a 'sloppy' vague kind of fit and it disengages again easily - and there is no obvious anchor-point, for the attached spring, without the spring fouling other moving parts.

If anyone can provide an image/drawing or discription of how it should be connected, I would be very grateful.


Alan ( and thanks)
Attached Thumbnails
Click image for larger version

Name:	photostudio_1596380572826.jpg
Views:	50
Size:	91.8 KB
ID:	212471   Click image for larger version

Name:	IMG_20200802_152521.jpg
Views:	49
Size:	92.1 KB
ID:	212472   Click image for larger version

Name:	IMG_20200802_152133.jpg
Views:	46
Size:	164.6 KB
ID:	212473  
Bikesmilligan is offline   Reply With Quote

Thread Tools

All times are GMT +1. The time now is 7:22 am.

All information and advice on this forum is subject to the WARNING AND DISCLAIMER located at
Failure to heed this warning may result in death or serious injury to yourself and/or others.

Powered by vBulletin®
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
Copyright ©2002 - 2020, Paul Stenning.