UK Vintage Radio Repair and Restoration Powered By Google Custom Search Vintage Radio Service Data

Go Back   UK Vintage Radio Repair and Restoration Discussion Forum > Specific Vintage Equipment > Vintage Test Gear and Workshop Equipment

Notices

Vintage Test Gear and Workshop Equipment For discussions about vintage test gear and workshop equipment such as coil winders.

Reply
 
Thread Tools
Old 27th Feb 2020, 2:49 pm   #1
Paul Galpin
Triode
 
Paul Galpin's Avatar
 
Join Date: Feb 2009
Location: Port Elizabeth, Eastern Cape, South Africa
Posts: 18
Default Grundig Oscilloscope - info needed

Hi!
I have a Grundig GO 10 scope and pages 1 and 2 of the circuit.
The power supply is dead, and I guess that is on page 3!

Can anyone help with Page 3 (and 4? and 5? etc.) and/or a manual?
Paul Galpin is offline   Reply With Quote
Old 27th Feb 2020, 4:14 pm   #2
orbanp1
Hexode
 
Join Date: Nov 2009
Location: London, Ontario, Canada
Posts: 483
Default Re: Grundig Oscilloscope - info needed

RM has all the schematic pages of your scope:
https://www.radiomuseum.org/r/grundi..._go10go_1.html
You can download it, page by page, slowly, max three pages a day, unless you are member.

Regards, Peter
orbanp1 is offline   Reply With Quote
Reply

Thread Tools



All times are GMT +1. The time now is 6:43 pm.


All information and advice on this forum is subject to the WARNING AND DISCLAIMER located at https://www.vintage-radio.net/rules.html.
Failure to heed this warning may result in death or serious injury to yourself and/or others.


Powered by vBulletin®
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
Copyright ©2002 - 2020, Paul Stenning.