|
Vintage Test Gear and Workshop Equipment For discussions about vintage test gear and workshop equipment such as coil winders. |
|
Thread Tools |
23rd Jul 2011, 1:48 pm | #1 |
Retired Dormant Member
Join Date: Jul 2011
Location: Berkshire
Posts: 1
|
Wayne Kerr AMS1
Could anyone point me in the direction of a Service or Instruction manual for a Wayne Kerr AMS1 audio measuring set?
Regards to all Old_Geoff |
25th Jul 2011, 6:32 pm | #2 |
Pentode
Join Date: Jan 2006
Location: Almeria, Spain
Posts: 221
|
Re: Wayne Kerr AMS1
Hello Geoff,
I've a AMS1 here (with the optional ABU1 - balanced in/out) and also have the operating/service manual. I can let you have a PDF of it, but it may take a while - over 100 pages with fold out sections. If you're desparate and have a rough idea of what part of the circuit you need I can do a few pages a lot quicker. Regards Mike A |
23rd Sep 2014, 7:23 pm | #3 |
Retired Dormant Member
Join Date: Sep 2014
Location: Norrkoping, Sweden
Posts: 2
|
Re: Wayne Kerr AMS1
Geoff and Mike,
I just obtained an AMS1 with ABU1 and a manual would be appreciated. Can any of you help me? Regards, Lennart |
24th Sep 2014, 10:17 pm | #4 |
Heptode
Join Date: Mar 2008
Location: Camberley, Surrey, UK.
Posts: 805
|
Re: Wayne Kerr AMS1
Hi Mike
Can I join the queue of people who want a copy of the info please. I would be happy with just the circuit and perhaps component layouts. My AMS1 is working fine, but like a lot of things it is only a matter of time till it stops. |
30th Sep 2014, 9:35 pm | #5 |
Pentode
Join Date: Jan 2006
Location: Almeria, Spain
Posts: 221
|
Re: Wayne Kerr AMS1
Hello Lennart And Brian,
Yes, can forward a scan of the AMS-1 Manual to you both if you can send me you e-mail address via PM (I'm not sure if Lennart has PM Privileges yet?) I have a hand drawn circuit of the ABU-1 unit some where but may take some time to find! however this unit is relatively simple. Regards Mike A |
1st Oct 2014, 10:06 am | #6 |
Heptode
Join Date: Mar 2008
Location: Camberley, Surrey, UK.
Posts: 805
|
Re: Wayne Kerr AMS1
Hi Mike
PM sent If Geoff and Lennard have PM problems, they could email me and I could pass on the details. I have an email contact address on the home page of my web site. |
1st Oct 2014, 10:35 am | #7 |
Retired Dormant Member
Join Date: Sep 2014
Location: Norrkoping, Sweden
Posts: 2
|
Re: Wayne Kerr AMS1
Today I received the AMS1 manual from WK and I am grateful because the equipment is 30 years old. However, no information was provided regarding the use of ABU1. If my PM doesn't work you will find an address on my hamradio web site.
Lennart SM5DFF |
1st Oct 2014, 3:01 pm | #8 |
Dekatron
Join Date: Nov 2003
Location: Heckmondwike, West Yorkshire, UK.
Posts: 9,642
|
Re: Wayne Kerr AMS1
Due to the new sections, PMs are now activated for all new Users. You should not have any problem with them.
|
10th Oct 2014, 9:56 pm | #9 |
Heptode
Join Date: Mar 2008
Location: Camberley, Surrey, UK.
Posts: 805
|
Re: Wayne Kerr AMS1
Just a quick note to thank Mike for the handbook,
Very Best Regards Beamcurrent |
3rd Feb 2015, 11:09 am | #10 |
Tetrode
Join Date: Feb 2009
Location: West London, UK.
Posts: 65
|
Re: Wayne Kerr AMS1
I would also like a copy of WK AMS1. I have just obtained one of these which has been modified. It basically works but will need some TLC!
Thanks |
5th Feb 2015, 3:20 pm | #11 |
Pentode
Join Date: Jan 2006
Location: Almeria, Spain
Posts: 221
|
Re: Wayne Kerr AMS1
Hello Chrissywissy,
If you send me your e-mail address via a PM I'll send a PDF of the handbook, I'm working away from home at present with limited internet access, but I'll see what I can do. Regards Mike A Last edited by coil1234; 5th Feb 2015 at 3:20 pm. Reason: Spelling |
27th Feb 2016, 5:55 pm | #12 |
Tetrode
Join Date: Mar 2015
Location: Milton Keynes, Buckinghamshire, UK.
Posts: 91
|
Re: Wayne Kerr AMS1
Anyone have any info on the AMS1? Specs or User Manual perhaps?
I can't find any published docs online. Just wondering how it compares with something like an HP334A for distortion measurements. |
29th Feb 2016, 10:59 am | #13 |
Tetrode
Join Date: Mar 2015
Location: Milton Keynes, Buckinghamshire, UK.
Posts: 91
|
Re: Wayne Kerr AMS1
I managed to get a scanned PDF of the Operation & Measurement Manual from Wayne Kerr.
I was going to post as an attachment but it exceeds the maxiumum size allowed for PDF files. The spec indicates the distortion from the inbuilt oscillator is 0.01% (15Hz-20kHz), so it's ok-ish but not that good compared to a Tektronix SG505 (0.0008%) The max distortion sensitivity range on the meter is 0.03% FSD with an inherent distortion of 0.005%. The inherent distortion in an HP334a (which has no built in signal source) is specified as -70dB (equivalent to 0.03%) So I think the AMS1 would be quite a useful instrument if used with an external low distortion signal source. |
29th Feb 2016, 12:10 pm | #14 |
Tetrode
Join Date: Feb 2009
Location: West London, UK.
Posts: 65
|
Re: Wayne Kerr AMS1
Hi Brian. I'd love a copy of the manual. If I PM you with my email address perhaps you would be kind enough to send it to me?
Thanks Chris |
11th Jun 2016, 10:39 pm | #15 |
Triode
Join Date: May 2016
Location: Hamilton, South Lanarkshire, Scotland, UK.
Posts: 19
|
Re: Wayne Kerr AMS1
Guys,
I have an AMS1 too, and the full manual, if anyone is still looking and Chrissywissy can't help.
__________________
You can never have too many oscilloscopes, DMMs or soldering irons . . . |