|
Vintage Amateur and Military Radio Amateur/military receivers and transmitters, morse, and any other related vintage comms equipment. |
|
Thread Tools |
25th Jan 2020, 7:17 pm | #1 |
Diode
Join Date: Jan 2020
Location: Wells, Somerset, UK.
Posts: 2
|
Yaesu FT-790R display/error code
I have recently purchased a used Yaesu FT-790R which appears to work but the main LCD display occasionally shows the letter "E" and nothing else.
It usually occurs when switching to FM mode. It can be cleared by twiddling knobs and pressing buttons after which the normal frequency display and functionality is restored. Does anyone have any idea clues as to what this indication means? I can't find any reference to error codes in the manual. Thanks, Ray |
26th Jan 2020, 11:23 am | #2 |
Nonode
Join Date: Nov 2015
Location: Welwyn Garden City, Hertfordshire, UK.
Posts: 2,015
|
Re: Yaesu FT-790R display/error code
There is a reset procedure in the user manual to use after the back up battery is replaced.
I wonder have you been through that? Have you changed the battery? Good luck. |