|
|
|
|
|||||||
| Sets, Parts and Service Information Wanted (private buyers only, no swaps) If you need help obtaining components, sets or equipment, post a message here. Private buyers only - no traders. No swaps. |
 |
|
|
Thread Tools |
9th Sep 2019, 10:32 am
|
#1 |
|
New Member
Join Date: Sep 2019
Location: Wisbech, Cambridgeshire, UK.
Posts: 1
|
Dynatron Goldring G101 drive belt
Hi there,
I've just been reading some of the posts on the forum about the G101. I'm trying the find a replacement drive belt for my Dynatron Goldring G101. The belt that was on it was approx 1mm square section and the open length is approx 255mm. Do you know of a replacement that is available as I can't seem to find anything that will fit? Thanks in advance. Martin Woollard |
|
|
9th Sep 2019, 7:18 pm
|
#2 |
|
Nonode
Join Date: Jun 2013
Location: Surbiton, SW London, UK.
Posts: 2,003
|
Re: Dynatron Goldring G101 drive belt
It's triangular cross section
https://www.gettheneedle.co.uk/turnt...ring-g101.html |
|
|
|
10th Sep 2019, 10:52 pm
|
#3 |
|
Pentode
Join Date: Dec 2008
Location: Royston, Hertfordshire, UK.
Posts: 131
|
Re: Dynatron Goldring G101 drive belt
If you haven't already done so, I suggest you clean off all the old grease in the bearing and re-grease it. The old grease can turn to toffee and, if doesn't seize altogether, will make life hard for the drive belt and motor, which isn't that powerful to begin with.
|
|
|
