|
Vintage Radio (domestic) Domestic vintage radio (wireless) receivers only. |
|
Thread Tools |
16th Mar 2020, 12:58 pm | #1 |
Heptode
Join Date: Nov 2017
Location: London, UK. Bury, Lancashire quite regularly :)
Posts: 611
|
Grundig factory U.K.
Hi,
Bit of an odd one this - didn't quite know where to place it... I recently discovered to my complete surprise that Grundig once had a facility literally walking distance from where I live. This is naturally of interest, however I cannot find any further information about this using the usual web search tools. I wondered if anyone here could throw any further light on this? Image giving the information source attached. Kidbrooke Park Road, London SE3.
__________________
Thermionic Emission, warms the cockles of your tubes. |
16th Mar 2020, 1:22 pm | #2 |
Dekatron
Join Date: Jan 2005
Location: Oxford, UK.
Posts: 17,843
|
Re: Grundig factory U.K.
Yes, I've noticed that address on service manuals.
Whether that was actually a factory, or essentially just the UK distributors for foreign-made gear, I don't know. |
16th Mar 2020, 1:26 pm | #3 |
Moderator
Join Date: Jun 2003
Location: Oxford, UK
Posts: 27,937
|
Re: Grundig factory U.K.
Like Nick, I'm pretty sure that Grundig didn't actually make anything in the UK. The London HQ was just a distribution centre for their retail and service network.
|
16th Mar 2020, 1:27 pm | #4 |
Dekatron
Join Date: Apr 2011
Location: Cornwall, UK.
Posts: 13,454
|
Re: Grundig factory U.K.
|
16th Mar 2020, 1:30 pm | #5 |
Dekatron
Join Date: Nov 2003
Location: Heckmondwike, West Yorkshire, UK.
Posts: 9,642
|
Re: Grundig factory U.K.
https://www.gracesguide.co.uk/Grundig
They may have moved sometime between 1953 and 1955 |
16th Mar 2020, 1:49 pm | #6 |
Nonode
Join Date: May 2007
Location: Redruth, Cornwall, UK.
Posts: 2,573
|
Re: Grundig factory U.K.
Hi.
I was also quite surprised to learn that Grundig had a radio factory in London. That particular model 3028 Malborough was my very first valve radio restoration. I'll never forget obtaining that set, back in Easter 1993 I took a load of old household junk to the recycling centre in the back of the Metro. There was a battered old sideboard that had just been dropped off. On top was a Grundig 3028. Back then you could buy goods from the centre. I paid £5 which I was very happy with. I really enjoyed restoring that set, even the EM34 magic eye had usable emission. The repairs were fairly routine, mostly cap replacements and a few resistors. The ECH81 frequency changer had to be replaced due to a lazy oscillator (triode section). The set had excellent sound quality and I regret selling it some time back. Regards, Symon |
16th Mar 2020, 2:02 pm | #7 |
Dekatron
Join Date: Jan 2005
Location: Oxford, UK.
Posts: 17,843
|
Re: Grundig factory U.K.
Some reminiscences here: https://sydenham.org.uk/forum/viewtopic.php?t=6180
It seems to have been a large victorian house, on the corner of Studland Road, apparently, where there's a big 1960s factory(?) now. Last edited by Nickthedentist; 16th Mar 2020 at 2:08 pm. |
16th Mar 2020, 2:13 pm | #8 |
Dekatron
Join Date: Jan 2005
Location: Oxford, UK.
Posts: 17,843
|
Re: Grundig factory U.K.
Address in 1984, according to something in the Gazette was: " Grundig International Limited of Newlands Park, Sydenham, London SE26 5NQ."
And this book says it was 40-42 Newlands Park: https://books.google.co.uk/books?id=...5NQ%22&f=false Google maps shows this as the big 1960s factory I mentioned in post 7. So maybe they moved to a big old house, redeveloped it as a modern factory, and stayed there for a few decades? As for Paul and my comments at the start of the thread... Has anyone got anything Grundig which claims to have been made over here? Or maybe the premises were for servicing sets or possibly re-working German-made sets for local distribution, e.g. fitting different mains transformers, dial glasses, UHF tuners etc. All speculation on my part. Maybe a post on the Sydenham forum could be worthwhile? Last edited by Nickthedentist; 16th Mar 2020 at 2:22 pm. |
16th Mar 2020, 2:21 pm | #9 |
Dekatron
Join Date: Jan 2012
Location: Brentwood, Essex, UK.
Posts: 5,337
|
Re: Grundig factory U.K.
I remember being told that, to avoid the high post-war import duty on tape recorders, Grundig tape recorders for the UK were fitted with an additional capacitor that killed the high frequency response. This allowed them to be imported as dictating machines on which a significantly lower duty was payable. Once in the UK the capacitors were removed prior to sale. I guess they would have needed somewhere to do the modification, although a corner of a warehouse would have heen sufficient.
|
16th Mar 2020, 2:26 pm | #10 |
Octode
Join Date: Aug 2008
Location: Rotherham, South Yorkshire, UK.
Posts: 1,722
|
Re: Grundig factory U.K.
If you have a 70s Grundig tape recorder like a TK121, 141 etc have a look at its bottom and it will probably say “made in UK” or similar. They had a factory in Northern Ireland.
There was also the non-sales showroom in Orchard St, just off Oxford St, London. A schoolboys dream of a place to visit! Peter |
16th Mar 2020, 2:28 pm | #11 |
Tetrode
Join Date: Jan 2015
Location: St Jean d'Angely, Charente-Maritime, France
Posts: 81
|
Re: Grundig factory U.K.
I think Grundig had a factory in the Republic of Ireland.
Bob |
16th Mar 2020, 2:29 pm | #12 |
Dekatron
Join Date: Jul 2008
Location: Kington, Herefordshire, UK.
Posts: 3,670
|
Re: Grundig factory U.K.
There was also a factory in Belfast.
|
16th Mar 2020, 2:30 pm | #13 |
Heptode
Join Date: Nov 2017
Location: London, UK. Bury, Lancashire quite regularly :)
Posts: 611
|
Re: Grundig factory U.K.
Thanks for the input so far people As regards the Sydenham address, I remember it well having been on a servicing course for the Grundig 2x4 Super V2000 VCR and you could (and I did) get exchange touch tune boards for their 110 degree, thyristor line output colour TV receivers there.
__________________
Thermionic Emission, warms the cockles of your tubes. |
16th Mar 2020, 2:46 pm | #14 |
Moderator
Join Date: Jun 2003
Location: Oxford, UK
Posts: 27,937
|
Re: Grundig factory U.K.
Thanks to everyone for the info, I stand corrected!
|
17th Mar 2020, 7:51 pm | #15 |
Hexode
Join Date: Sep 2013
Location: Wembley, London, UK.
Posts: 395
|
Re: Grundig factory U.K.
Hello to all. About Grundig factory. It is sometimes amazing what one will see if they live long enough. I actually worked at the Grundig factory in Sydenham. Not as an electronic engineer, but as a digging machine driver, digging out foundations, as the factory was enlarged. It was definitely a production factory, but it may have been restricted to making televisions. Years later, I actually visited the factory to obtain Grundig Television manuals. All the best. John.
|
18th Mar 2020, 7:37 pm | #16 |
Tetrode
Join Date: Oct 2008
Location: Milano, Italy
Posts: 62
|
Re: Grundig factory U.K.
|
18th Mar 2020, 11:30 pm | #17 |
Dekatron
Join Date: Jun 2009
Location: Staffordshire Moorlands, UK.
Posts: 5,270
|
Re: Grundig factory U.K.
there's an online video of the belfast grundig factory here
https://digitalfilmarchive.net/media...-dunmurry-2337
__________________
Kevin |
19th Mar 2020, 1:11 am | #18 |
Dekatron
Join Date: Apr 2019
Location: Worthing, West Sussex, UK.
Posts: 6,600
|
Re: Grundig factory U.K.
Several of the old (late 50s /early 60s) Grundig Reel to Reel Tape Recorder Service manuals show the Newlands Park, Sydenham address, also 1960s Technical Information Bulletins.
Earlier Reel to Reel recorders (around middle 50s) give the Kidbrooke Park Road, S.E.3 address. |
19th Mar 2020, 3:42 am | #19 |
Dekatron
Join Date: Sep 2011
Location: Rugeley, Staffordshire, UK.
Posts: 8,830
|
Re: Grundig factory U.K.
Whenever I used to go through Rugby on the train, there was a huge sign on a building near to the station marked 'Grundig'. I'm not sure what it's function was but I think it was to do with teles - either repairs or parts centre. I'm talking late 90s.
__________________
A digital radio is the latest thing, but a vintage wireless is forever.. |
19th Mar 2020, 7:48 am | #20 |
Dekatron
Join Date: Sep 2003
Location: Near Swindon, North Wiltshire, UK.
Posts: 3,609
|
Re: Grundig factory U.K.
Grundig moved their UK headquarters from Sydenham to Rugby in the 1990s. This included spares and service, plus CCTV. I’ve been there once (through work) in connection with their solid state image sensor monochrome cameras. It was in Mill Lane, IIRC.
|