UK Vintage Radio Repair and Restoration Powered By Google Custom Search Vintage Radio Service Data

Go Back   UK Vintage Radio Repair and Restoration Discussion Forum > Specific Vintage Equipment > Vintage Television and Video

Notices

Vintage Television and Video Vintage television and video equipment, programmes, VCRs etc.

Reply
 
Thread Tools
Old 29th Jul 2019, 8:59 pm   #81
FERNSEH
Dekatron
 
FERNSEH's Avatar
 
Join Date: Mar 2005
Location: Gateshead, Tyne and Wear, UK.
Posts: 5,757
Default Re: Baird Garrick

The Fernseh DE6 didn't employ the Baird patented frame timebase transformer with the extended pole pieces. The scanning coils look like a conventional type. Chassis construction different from the Baird T5.
Link to a topic about the DE6: https://www.vintage-radio.net/forum/...ad.php?t=42854
A picture of the internals of the set appears in post No.9.

DFWB.
FERNSEH is online now   Reply With Quote
Old 29th Jul 2019, 10:09 pm   #82
peter_scott
Nonode
 
peter_scott's Avatar
 
Join Date: May 2003
Location: Edinburgh, UK.
Posts: 2,149
Default Re: Baird Garrick

David,

Darius' reference was to the Fernseh HPE 5R. https://www.earlytelevision.org/fernseh.html

HPE 5 R (1939). Projection set produces a 17" by 20" picture on a directional screen attached to the lid. This set appeared in a 1939 magazine and was identified as being at the 1939 Berlin Exposition. It was to be sold for about $225. It uses Baird's patented vertical deflection. Baird was a member of Fernseh A.G. (Information courtesy of Darius-Karim Mottaghian-Milani).

Peter

Last edited by peter_scott; 29th Jul 2019 at 10:18 pm.
peter_scott is offline   Reply With Quote
Old 1st Aug 2019, 1:40 pm   #83
beery
Heptode
 
beery's Avatar
 
Join Date: Jun 2006
Location: Ware, Hertfordshire, UK.
Posts: 686
Default Re: Baird Garrick

Hi all,
Last night I drew up the circuit of the timebase section of the Baird Garrick as it currently is, with flyback EHT. See the attached PDF.

The focusing arrangement is interesting with a constant current sink which works by comparing the voltage across VR6 with a 100V reference provided by neon stabiliser V1. The grounded grid of the SP42 looks very odd at first.

Also note the DC restoration diode on the CRT grid, however no such diode appears on the cathode circuit. Remember that the black and red wires from the vision receiver provide a negative and a positive video output.

When the set was adapted to flyback EHT, VR4, L3 and C4 were added together with V8 and C17.

I don't know the actual value of wirewound screen feed resistor R8 as it has overheated, loosing all of its outer cement and causing the resistance wire to spring out. I will attempt to measure what is left.

The frame circuit is very similar to the Baird T18.

Cheers
Andy
Attached Files
File Type: pdf Baird Garrick Timebase (modified).pdf (20.1 KB, 41 views)
beery is offline   Reply With Quote
Old 7th Aug 2019, 2:08 pm   #84
beery
Heptode
 
beery's Avatar
 
Join Date: Jun 2006
Location: Ware, Hertfordshire, UK.
Posts: 686
Default Re: Baird Garrick

Hi all,
in the circuit of the timebase that is in my last post, you can see that the screen feed resistor of the line output valve (R8) is labelled 3K3? The reason why becomes clear when you look at the attached photo of it...

Anyway, you can just make out that the very left hand part of this resistor is still intact. By measuring its resistance and width I was able to extrapolate it. This produced a value in the range of 6K to 8K, so I have ordered a 6K8 14W resistor to try.
It is interesting to note that the screen feed is not decoupled unlike in the Baird Countryman (which is probably where the flyback EHT line output transformer comes from). The pre-war T18 circuit is of no use here either as it uses a triode for the line output.

Cheers
Andy
Attached Thumbnails
Click image for larger version

Name:	IMG_20190806_233446s.jpg
Views:	95
Size:	111.9 KB
ID:	187991  
beery is offline   Reply With Quote
Old 30th Aug 2019, 12:01 am   #85
beery
Heptode
 
beery's Avatar
 
Join Date: Jun 2006
Location: Ware, Hertfordshire, UK.
Posts: 686
Default Re: Baird Garrick

Hi all,
I've been re-stuffing the waxies on the underside of the timebase chassis of the Baird. Now I turn my attention to the electrolytics...
The first photo shows a metal bodied electrolytic who's can might have been shorting against the tag next to it. This would be one reason for the burn up in the line output stage. Anyway, it is not original, so I set out to make up a cardboard one copied from others in the set.

I obtained a spare Plessey capacitor of the right size and different value. First I removed the label and pulled off the lead out wires by waggling them until they snapped.
Then (picture 2) I drilled a 0.8mm hole just under the rivet on each end cap.

The capacitor is then sliced open (picture 3) and the insides removed.

A new capacitor is fitted with extended lead out wires which are threaded through the holes that were drilled in the end caps (picture 4).

The end caps were then glued in with UHU, the cut slot was also glued with UHU and a single layer of sellotape was wound round to hold it together whilst the glue set.
The tape was left on, but covered up by covering with a lablel of the correct value which I had made by colour photocopying it from one of the other capacitors in the set (which was also rebuilt).

Finally the capacitor was put back in place of the metal bodied one. You can see this at the top of picture 5. The capacitor that was copied is at the bottom of the picture and the three waxies at the bottom end have also been re-stuffed. Note the burnt out resistor has been replaced with a new one and the damaged wiring re-sleeved.

Cheers
Andy
Attached Thumbnails
Click image for larger version

Name:	IMG_20190814_005825s.jpg
Views:	98
Size:	87.8 KB
ID:	189099   Click image for larger version

Name:	IMG_20190814_004600s.jpg
Views:	96
Size:	53.5 KB
ID:	189100   Click image for larger version

Name:	IMG_20190814_004416s.jpg
Views:	92
Size:	78.5 KB
ID:	189101   Click image for larger version

Name:	IMG_20190814_004742s.jpg
Views:	97
Size:	81.3 KB
ID:	189102   Click image for larger version

Name:	IMG_20190814_234601s.jpg
Views:	102
Size:	86.2 KB
ID:	189103  

beery is offline   Reply With Quote
Old 30th Aug 2019, 11:58 am   #86
peter_scott
Nonode
 
peter_scott's Avatar
 
Join Date: May 2003
Location: Edinburgh, UK.
Posts: 2,149
Default Re: Baird Garrick

Very nice!

Peter
peter_scott is offline   Reply With Quote
Old 30th Aug 2019, 12:39 pm   #87
FERNSEH
Dekatron
 
FERNSEH's Avatar
 
Join Date: Mar 2005
Location: Gateshead, Tyne and Wear, UK.
Posts: 5,757
Default Re: Baird Garrick

This is the way it's going with the restoration of early TVs and radios. We're do our very best to return the old electronics back to the original appearance. No more horrible Hi-Viz capacitors on show. The only worry of course is if a set was to fall into the hands of someone else who then takes a look at all the old looking components and decides to replace everything we painstakingly replicated. It would be a good idea to keep a service record with every set.

DFWB.
FERNSEH is online now   Reply With Quote
Old 30th Aug 2019, 12:49 pm   #88
stevehertz
Dekatron
 
stevehertz's Avatar
 
Join Date: Sep 2011
Location: Rugeley, Staffordshire, UK.
Posts: 3,885
Default Re: Baird Garrick

I have seen masks successfully cut from large pieces of expanded polystyrene (easily obtainable) and the area of the mask that you see is then overlaid and shaped with plaster of paris by scraping and sanding etc. Alternatively - though far less easy - fashion from wood.
__________________
A digital radio is the latest thing, but a vintage wireless is forever..
stevehertz is offline   Reply With Quote
Old 5th Sep 2019, 12:45 am   #89
beery
Heptode
 
beery's Avatar
 
Join Date: Jun 2006
Location: Ware, Hertfordshire, UK.
Posts: 686
Default Re: Baird Garrick

Hi all,
not long to go before power up
Here you can see a general view of the vision chassis. Note that the rogue flyback EHT line output transformer has been put back for now.

The waxies on the tube base panel still need rebuilding, felt strips need to be added to the woodwork to cushion the tube, the aquadag earthing needs to be worked out and the new CRT fitted.

Of course a replacement set of valves has been fitted (they were nearly all missing), most of which were NOS. When I opened up the box containing the rare SP42, I found it was from the BBC valve department - I hope they don't want it back

Cheers
Andy
Attached Thumbnails
Click image for larger version

Name:	IMG_20190904_235503s.jpg
Views:	102
Size:	151.2 KB
ID:	189513   Click image for larger version

Name:	IMG_20190905_000856s.jpg
Views:	101
Size:	63.7 KB
ID:	189514  
beery is offline   Reply With Quote
Old 10th Sep 2019, 1:44 am   #90
beery
Heptode
 
beery's Avatar
 
Join Date: Jun 2006
Location: Ware, Hertfordshire, UK.
Posts: 686
Default Re: Baird Garrick

Hi all,
after re-stuffing the remaining caps on the CRT base board, I thought now might be a good time to power the set up before I fit the CRT.

I lugged the heavy PSU on to the bench and connected it up with the fuse to the mains EHT transformer disconnected.
In the second picture you can see the orange glow of the 100V reference for the focus regulator.
At first there was no line whistle, although there was a very loud noise coming from the frame coils. I swapped the Mazda PEN46 that I had fitted in the frame generator position with the VT127 (PEN46 clone) which I had in the line stage and this time I got line whistle, but no frame noise.
I did wonder if the Rayethon VT127 (which was a NOS WW2 air ministry valve) was no good in a self oscillating output stage. I didn't have a spare Mazda PEN46, but fortunately I did have a spare NOS VT127. Lucklily this one worked ok.
The third photo shows the faulty valve - it looks ok and I was the first person to open the box since it was re-labled with a CV number.

I attached a scope to the feedback winding of the frame output circuit and it showed a nice waveform which had 50Hz nicely in the range of the hold control. Turning up the height seemed to cause a breakdown which turned out to be the spark gap in the x100 scope probe Notice the size of the flyback pulse on the scope . Removing the probe enabled me to turn the height control right up. The scope probe survived intact . I wonder how high the anode voltage goes during the frame flyback?

I attached the scope probe across the line coils and got a lovely waveform. Again 10KHz was easily in range of the hold control. I then fed in the test card from an Aurora and was able to lock the timebases. The scope picture shows a nice 10.125KHz locked waveform

The HT was 365V.
The flyback EHT was rather low at 4.11KV. Maybe the EY51 is a little tired. However, when the set was first obtained it was noted that there had been a wax leak from the line output transformer. It turns out that the wax from the EHT rectifier's heater winding has gone gooey, so maybe there is an EHT leak there. I must look out an EHT stick and try it.

That's all for now.

Cheers
Andy
Attached Thumbnails
Click image for larger version

Name:	IMG_20190909_005312s.jpg
Views:	70
Size:	140.5 KB
ID:	189872   Click image for larger version

Name:	IMG_20190909_011111s.jpg
Views:	68
Size:	71.7 KB
ID:	189873   Click image for larger version

Name:	IMG_20190909_011429s2.jpg
Views:	68
Size:	95.6 KB
ID:	189874   Click image for larger version

Name:	IMG_20190909_232630s.jpg
Views:	67
Size:	71.1 KB
ID:	189875   Click image for larger version

Name:	IMG_20190909_234155s.jpg
Views:	54
Size:	74.2 KB
ID:	189876  


Last edited by beery; 10th Sep 2019 at 1:47 am. Reason: added a smiley
beery is offline   Reply With Quote
Old 17th Sep 2019, 12:33 am   #91
beery
Heptode
 
beery's Avatar
 
Join Date: Jun 2006
Location: Ware, Hertfordshire, UK.
Posts: 686
Default Re: Baird Garrick

Hi all,
this is the first of a two part update.

I tried an EHT diode in place of the EY51, but still got no more than about 4kV. So I put the EY51 back in circuit.

I used a piece of 35mm waste pipe to ansue that the scan coils and CRT clamp were reasonably in line.

Next I attached some felt strips to the wooden CRT support, together with an aquadag earthing contact.

Next up - fitting the CRT...

Cheers
Andy
Attached Thumbnails
Click image for larger version

Name:	IMG_20190914_214730s.jpg
Views:	28
Size:	95.1 KB
ID:	190311   Click image for larger version

Name:	IMG_20190914_223017s.jpg
Views:	30
Size:	68.7 KB
ID:	190312   Click image for larger version

Name:	IMG_20190915_010128s.jpg
Views:	33
Size:	86.9 KB
ID:	190313  
beery is offline   Reply With Quote
Old 17th Sep 2019, 12:54 am   #92
beery
Heptode
 
beery's Avatar
 
Join Date: Jun 2006
Location: Ware, Hertfordshire, UK.
Posts: 686
Default Re: Baird Garrick

Hi all,
part 2 of 2 of my update.

I installed a NOS CRT. It is an MW31-74 which has a cavity style anode connector and also requires an ion trap magnet. John (Heatercathodeshort) very kindly provided me with an ion trap magnet and a cavity to top cap anode adaptor (see second photo).

I powered up the set and after fiddling with the ion trap magnet, I got a picture of a sort...

The focus is poor due to the low EHT and the line linearity is terrible. I will have a go at trying different screen feed resitor valves for the line output valve when I get the chance; to see if that solves both problems.

Another issue is image cut off slightly on the left-hand side. This is mostly due to the ion trap magnet no quite being in the right place. The fourth picture shows the problem. The magnet ring is behind the focus coil, and it is just below the 10K resistor behind the paxolin panel. It really needs to be nearer the tube base, but if put the other side of the panel it interferes with the solder tags. I need to think about this one...

The last photo shows the CRT guarantee card. Do you think it is still valid?

Cheers
Andy
Attached Thumbnails
Click image for larger version

Name:	IMG_20190915_014824s.jpg
Views:	52
Size:	128.2 KB
ID:	190314   Click image for larger version

Name:	P1040947s2.JPG
Views:	52
Size:	42.2 KB
ID:	190315   Click image for larger version

Name:	IMG_20190915_015052s.jpg
Views:	62
Size:	86.9 KB
ID:	190316   Click image for larger version

Name:	IMG_20190915_015539s2.jpg
Views:	50
Size:	104.8 KB
ID:	190317   Click image for larger version

Name:	IMG_20190915_020153s.jpg
Views:	46
Size:	111.8 KB
ID:	190318  

beery is offline   Reply With Quote
Old 17th Sep 2019, 9:25 am   #93
peter_scott
Nonode
 
peter_scott's Avatar
 
Join Date: May 2003
Location: Edinburgh, UK.
Posts: 2,149
Default Re: Baird Garrick

Quote:
Originally Posted by beery View Post
Another issue is image cut off slightly on the left-hand side. This is mostly due to the ion trap magnet no quite being in the right place.
Cheers
Andy
Hi Andy,

I wonder if this might be another case of David's magnetised scan yoke and shifting the ion trap to compensate for it is cutting off the beam?

Peter
peter_scott is offline   Reply With Quote
Reply

Thread Tools



All times are GMT +1. The time now is 1:08 am.


All information and advice on this forum is subject to the WARNING AND DISCLAIMER located at https://www.vintage-radio.net/rules.html.
Failure to heed this warning may result in death or serious injury to yourself and/or others.


Powered by vBulletin®
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Copyright ©2002 - 2019, Paul Stenning.