UK Vintage Radio Repair and Restoration Powered By Google Custom Search Vintage Radio Service Data

Go Back   UK Vintage Radio Repair and Restoration Discussion Forum > Offered and Wanted Messages > Sets, Parts and Service Information Wanted (private buyers only, no swaps)

Notices

Sets, Parts and Service Information Wanted (private buyers only, no swaps) If you need help obtaining components, sets or equipment, post a message here. Private buyers only - no traders. No swaps.

Closed Thread
 
Thread Tools
Old 18th Jan 2015, 6:42 pm   #1
sobell1980
Octode
 
sobell1980's Avatar
 
Join Date: May 2011
Location: Bromyard, Herefordshire, UK.
Posts: 1,077
Default BSR UA8 idler pulley required.

Hi all.
I am in need of a BSR UA8/ Monarch idler pulley for the Braun radiogram I am restoring. The rubber has gone hard and no amount of conditioning can bring it back to life. If anyone could help me source one, of course appropriate payment will be made. Many thanks.
Dave.
sobell1980 is offline  
Old 18th Jan 2015, 9:25 pm   #2
Ed_Dinning
Dekatron
 
Join Date: Jan 2004
Location: Newcastle upon Tyne, Tyne & Wear, UK.
Posts: 5,561
Default Re: BSR UA8 idler pulley required.

Hi Dave, a picture with dimensions may help if we are searching our junk boxes.

Ed
Ed_Dinning is online now  
Old 19th Jan 2015, 6:48 pm   #3
tracypaper
Octode
 
tracypaper's Avatar
 
Join Date: Aug 2010
Location: Beeston, Leeds, West Yorkshire, UK.
Posts: 1,018
Default Re: BSR UA8 idler pulley required.

PM me your address i'll send you one for cost of postage.
Gaz.
tracypaper is offline  
Old 19th Jan 2015, 8:01 pm   #4
sobell1980
Octode
 
sobell1980's Avatar
 
Join Date: May 2011
Location: Bromyard, Herefordshire, UK.
Posts: 1,077
Default Re: BSR UA8 idler pulley required.

Measurements and photos chaps.
Many thanks.
Dave.
Attached Thumbnails
Click image for larger version

Name:	20150119_172408.jpg
Views:	90
Size:	80.6 KB
ID:	102924   Click image for larger version

Name:	20150119_172446.jpg
Views:	82
Size:	46.0 KB
ID:	102925   Click image for larger version

Name:	20150119_172556.jpg
Views:	74
Size:	82.0 KB
ID:	102926  
sobell1980 is offline  
Old 20th Jan 2015, 7:34 pm   #5
tracypaper
Octode
 
tracypaper's Avatar
 
Join Date: Aug 2010
Location: Beeston, Leeds, West Yorkshire, UK.
Posts: 1,018
Default Re: BSR UA8 idler pulley required.

Idlers from most BSR decks should do and are around 40mm in diameter, although I am told a few mm reduction in size is not important.
Idler sent 40mm.
Gaz.
tracypaper is offline  
Old 25th Jan 2015, 1:22 pm   #6
sobell1980
Octode
 
sobell1980's Avatar
 
Join Date: May 2011
Location: Bromyard, Herefordshire, UK.
Posts: 1,077
Default Re: BSR UA8 idler pulley required.

Gaz has sent the idler. Fitted, all working a treat now. Many thanks to all involved with the help. Many thanks Gaz. This thread can now be closed.
Dave.
sobell1980 is offline  
Closed Thread

Thread Tools



All times are GMT +1. The time now is 10:16 pm.


All information and advice on this forum is subject to the WARNING AND DISCLAIMER located at https://www.vintage-radio.net/rules.html.
Failure to heed this warning may result in death or serious injury to yourself and/or others.


Powered by vBulletin®
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Copyright ©2002 - 2019, Paul Stenning.