UK Vintage Radio Repair and Restoration Powered By Google Custom Search Vintage Radio Service Data

Go Back   UK Vintage Radio Repair and Restoration Discussion Forum > General Vintage Technology > Components and Circuits

Notices

Components and Circuits For discussions about component types, alternatives and availability, circuit configurations and modifications etc. Discussions here should be of a general nature and not about specific sets.

Closed Thread
 
Thread Tools
Old 2nd Jul 2009, 10:23 pm   #1
georgesgiralt
Hexode
 
Join Date: Jul 2008
Location: Toulouse, France
Posts: 401
Default "Buttons" for a 90V battery.

Hi !
I'm restoring a Telefunken Bajazzo fro the mid fifties.
I'm making a power device to get 90V from a set of NiMh batteries.
For now, I've opened a dead PP9 to make the connection between the radio and my electronic device , but these are crimped on the plastic PP9 box and quite not reusable.
Do you know how I can make a couple of them ? Where to find some new ones, or re-use the PP9 ones ?
Thanks for your advice !
georgesgiralt is offline  
Old 2nd Jul 2009, 11:39 pm   #2
Herald1360
Dekatron
 
Herald1360's Avatar
 
Join Date: Feb 2007
Location: Leominster, Herefordshire, UK.
Posts: 13,565
Default Re: "Buttons" for a 90V battery.

http://uk.rs-online.com/web/search/s...64-754&x=0&y=0

Looks like what you want.

Presumably RS France should have them too....

Chris

Just found http://radiospares-fr.rs-online.com/...94956280&Nty=1

For some reason they have a different stock no.
Herald1360 is offline  
Old 3rd Jul 2009, 5:15 am   #3
georgesgiralt
Hexode
 
Join Date: Jul 2008
Location: Toulouse, France
Posts: 401
Default Re: "Buttons" for a 90V battery.

Thanks Chris !
The French site said that this product is no more sold" this may be why they have a different part number.
I'll pay mine in Sterling Pounds ;-)
georgesgiralt is offline  
Old 3rd Jul 2009, 8:41 am   #4
Mike Phelan
Dekatron
 
Mike Phelan's Avatar
 
Join Date: Nov 2003
Location: Near Leeds, West Yorkshire, UK
Posts: 4,254
Default Re: "Buttons" for a 90V battery.

I know you're now sorted, but I have managed to remove the PP9 connectors on plastic bases by drilling out the rivets and replacing them with 8 BA countersunk screws.
__________________
Mike.
Mike Phelan is offline  
Closed Thread

Thread Tools



All times are GMT +1. The time now is 7:27 am.


All information and advice on this forum is subject to the WARNING AND DISCLAIMER located at https://www.vintage-radio.net/rules.html.
Failure to heed this warning may result in death or serious injury to yourself and/or others.


Powered by vBulletin®
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Copyright ©2002 - 2019, Paul Stenning.