UK Vintage Radio Repair and Restoration Powered By Google Custom Search Vintage Radio and TV Service Data

Go Back   UK Vintage Radio Repair and Restoration Discussion Forum > Specific Vintage Equipment > Vintage Tape (Audio), Cassette, Wire and Magnetic Disc Recorders and Players

Notices

Vintage Tape (Audio), Cassette, Wire and Magnetic Disc Recorders and Players Open-reel tape recorders, cassette recorders, 8-track players etc.

Closed Thread
 
Thread Tools
Old 12th Nov 2014, 9:00 am   #1
Michael Maurice
Moderator
 
Michael Maurice's Avatar
 
Join Date: Feb 2006
Location: Wembley, Middlesex
Posts: 7,219
Default LEFT - STEREO - MONO - RIGHT Switch

Over the years there have been several threads asking for help on the track switching arrangements for the Akai 3000D and 4000D / DS and their derivative tape recorders.

This simple switching box should help you overcome this without modifying the Akai machine.

It can also be used with any other tape recorder or cassette recorder

it is easily built, the 3 pole 4 way rotary switch is readily available.
Attached Thumbnails
Click image for larger version

Name:	scan0004.jpg
Views:	893
Size:	24.4 KB
ID:	100057  
__________________
Forum Moderator

http://www.michaelmauricerepairs.co.uk/
Michael Maurice is offline  
Old 12th Nov 2014, 12:42 pm   #2
Dave Moll
Dekatron
 
Dave Moll's Avatar
 
Join Date: Feb 2005
Location: West Cumbria (CA13), UK
Posts: 6,113
Default Re: LEFT - STEREO - MONO - RIGHT Switch

Is it good practice to connect left and right channels direct to one another? I understood that it is normal practice to include a suitable resistance in each channel prior to mixing - which could easily be achieved in the wires going to position three of the left and right channel switches. I'll leave it to others to recommend a suitable value.
__________________
Mending is better than Ending (cf Brave New World by Aldous Huxley)
Dave Moll is offline  
Old 12th Nov 2014, 1:19 pm   #3
Paul Stenning
Administrator
 
Paul Stenning's Avatar
 
Join Date: Dec 2002
Location: Cardiff
Posts: 9,057
Default Re: LEFT - STEREO - MONO - RIGHT Switch

Should there be resistors (around 1K) in series with the inputs so the outputs of the source device aren't shorted together when switched to MONO? It's not an issue for line level outputs as they normally have significant impedance but could be for headphone outputs on MP3 players etc.
__________________

Paul Stenning
Forum Admin/Owner and BVWS Webmaster
Paul Stenning is offline  
Old 12th Nov 2014, 1:46 pm   #4
Michael Maurice
Moderator
 
Michael Maurice's Avatar
 
Join Date: Feb 2006
Location: Wembley, Middlesex
Posts: 7,219
Default Re: LEFT - STEREO - MONO - RIGHT Switch

1970s/1980s amplifiers did just that, connect left and right channels together. The Switch was designed around these tape recorders but Dave and Paul are correct, if you're using headphones out say on MP3 players or to be safe, insert a 1K resistor between each of the left and right inputs and their respective switches.
__________________
Forum Moderator

http://www.michaelmauricerepairs.co.uk/
Michael Maurice is offline  
Old 15th Nov 2014, 10:30 pm   #5
Jimmyhaflinger
Heptode
 
Jimmyhaflinger's Avatar
 
Join Date: Feb 2007
Location: La Spezia, Italy
Posts: 834
Default Re: LEFT - STEREO - MONO - RIGHT Switch

i have an Akai CS-34D cassette deck that's extremely unhappy to have its outputs shorted together in mono, it distorted heavily when i once tried to do this without putting resistors between the outputs
Jimmyhaflinger is offline  
Old 17th Apr 2015, 5:38 am   #6
majoconz
Heptode
 
majoconz's Avatar
 
Join Date: Jan 2008
Location: Ashhurst, Manawatu, New Zealand
Posts: 570
Default Re: LEFT - STEREO - MONO - RIGHT Switch

I found that if you have a mono recording on a stereo machine and then you join the two outputs together on playback, then there's all sorts of funny phasing effects.
__________________
Cheers - Martin ZL2MC
majoconz is offline  
Old 21st Apr 2015, 11:57 am   #7
Michael Maurice
Moderator
 
Michael Maurice's Avatar
 
Join Date: Feb 2006
Location: Wembley, Middlesex
Posts: 7,219
Default Re: LEFT - STEREO - MONO - RIGHT Switch

That is because the azimuth of the heads on either the recording machine or playback machine is out of alignment
__________________
Forum Moderator

http://www.michaelmauricerepairs.co.uk/
Michael Maurice is offline  
Old 21st Apr 2015, 3:40 pm   #8
paulsherwin
Moderator
 
paulsherwin's Avatar
 
Join Date: Jun 2003
Location: Oxford, UK
Posts: 27,740
Default Re: LEFT - STEREO - MONO - RIGHT Switch

Indeed, practically all domestic cassette decks will exhibit this behaviour to some extent when replaying cassettes recorded on something else (including commercially recorded cassettes). It's a matter of precise vertical head alignment rather than simple azimuth. The phase error is largely undetectable when listening in stereo.
paulsherwin is offline  
Closed Thread

Thread Tools



All times are GMT +1. The time now is 8:15 am.


All information and advice on this forum is subject to the WARNING AND DISCLAIMER located at https://www.vintage-radio.net/rules.html.
Failure to heed this warning may result in death or serious injury to yourself and/or others.


Powered by vBulletin®
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Copyright ©2002 - 2023, Paul Stenning.