|
Vintage Radio (domestic) Domestic vintage radio (wireless) receivers only. |
|
Thread Tools |
20th Nov 2017, 9:38 pm | #1 |
Pentode
Join Date: Jul 2014
Location: Northamptonshire, UK.
Posts: 135
|
Roberts RCM1 drive cord
Can anyone help me with a Roberts RCM1 clock radio that i am repairing for a work mate. The drive cord has disintegrated beyond recognition. I think i have worked out the correct route of the cord, but I'm struggling with the length, and my patience is wearing thin now! Can anyone point me in the right direction ??
__________________
If it ain't bust don't fix it |
20th Nov 2017, 10:07 pm | #2 |
Dekatron
Join Date: Nov 2003
Location: Fakenham, Norfolk, UK.
Posts: 4,259
|
Re: Roberts RCM1 drive cord
I've not come across an RCM1 manual, but do you have access to the RM33 one?
http://www.service-data.com/product....15/7352/m15715 As far as I know the RCM1 is pretty much an RM33 less the presets but plus a clock, so it seems at least likely that the tuning drive will be more or less identical. Paul |
9th Dec 2017, 6:54 pm | #3 |
Pentode
Join Date: Jul 2014
Location: Northamptonshire, UK.
Posts: 135
|
Re: Roberts RCM1 drive cord
Thanks for the input, I couldn't find the correct dial cord length on the service sheet I did however get the length right 2nd time by trial and a bit more error than I would have liked, I must admit that getting the back of this set was a absolute bu@%er, someone in the past had glued the back on with enough araldite to repair the Hull of the Titanic
__________________
If it ain't bust don't fix it |