|
Vintage Test Gear and Workshop Equipment For discussions about vintage test gear and workshop equipment such as coil winders. |
|
Thread Tools |
10th Feb 2019, 11:16 pm | #1 |
Diode
Join Date: Feb 2019
Location: Crewe, Cheshire, UK.
Posts: 3
|
Schlumberger ENERTEC 5072 info
Hello,
I just bought a second hand Schlumberger ENERTEC 5072 oscilloscope. Without a manual. Can anybody tell me what is its maximum frequency? And if possible point me to a PDF manual for it? I searched a lot and could not find any. Thanks |
13th Feb 2019, 12:17 pm | #2 |
Octode
Join Date: Oct 2007
Location: Exeter, Devon, UK.
Posts: 1,554
|
Re: Schlumberger ENERTEC 5072 info
Enertec 5072 storage oscilloscope.
All I have is the 1981 catalogue, which gives you the specification. It is 12Mhz bandwidth, dual trace, single timebase, analogue storage. Tube will be by Thomson-CSF, as it's French made, probably TH8902. I have the data sheet. But no service manual or circuit. If you manage to find anything on the web, please let me know. wme_bill |
27th Feb 2019, 1:44 pm | #3 |
Diode
Join Date: Feb 2019
Location: Crewe, Cheshire, UK.
Posts: 3
|
Re: Schlumberger ENERTEC 5072 info
Thank you very much for the info. I could not find anything about the scope yet though
|
27th Feb 2019, 5:46 pm | #4 |
Tetrode
Join Date: Jan 2019
Location: Toulouse, France
Posts: 65
|
Re: Schlumberger ENERTEC 5072 info
I have found on the net service/user manual of Enertec scope of the same generation of scope in French and without memory : https://elektrotanya.com/enertec_sch.../download.html
I hope that this will help you. For the use of the scope I think that a manual is necessary , but can help for calibration or repairing, even if it not the same model. Regards Jean-Louis Last edited by loulou31; 27th Feb 2019 at 6:15 pm. |
8th Mar 2019, 4:02 pm | #5 |
Diode
Join Date: Feb 2019
Location: Crewe, Cheshire, UK.
Posts: 3
|
Re: Schlumberger ENERTEC 5072 info
Thank you very much.
|