|
Vintage Amateur and Military Radio Amateur/military receivers and transmitters, morse, and any other related vintage comms equipment. |
|
Thread Tools |
2nd Nov 2022, 9:33 am | #1 |
Diode
Join Date: Nov 2022
Location: Dursley, Gloucestershire, UK.
Posts: 3
|
R1155N help required please.
Hi, this is my first post to the forum - apologies for any errors:
I am rebuilding a R1155N receiver which I acquired in pieces. I am having difficulty in a couple of areas: L30 (Audio transformer) – I can find no data relating the physical terminals of the transformer to their position either in the schematic (A.P.2548A Fig 4) or on the web. Similarly for the 3 D.F. transformers L4, L5 & L40. Can anyone tell me for each transformer which terminal is which? On The schematic there is an unidentified inductor shown below L40/above L3 (center tap to ground and winding ends to F.S. wf 2 and 8). can anyone tell me what it’s reference is? Also, ref L40... someone would appear to have taken a hacksaw to it and cut off the ferrite slug. Does anyone have any information on what the complete tuning slug should look like? Many thanks, Derrick |
2nd Nov 2022, 12:17 pm | #2 |
Nonode
Join Date: Mar 2005
Location: Nuneaton, Warwickshire, UK.
Posts: 2,040
|
Re: R1155N help required please.
Hi Derrick, welcome.
Have you tried the VMARS site. They have a library, accessable to all, of all kinds of manuals. Cheers All
__________________
Life's a long song, but the tune ends too soon for us all. |
2nd Nov 2022, 2:50 pm | #3 |
Diode
Join Date: Nov 2022
Location: Dursley, Gloucestershire, UK.
Posts: 3
|
Re: R1155N help required please.
Hi, thanks for the reply - yes have consulted VMARS library. Unfortunately (unless I'm missing something) the official documentation - A.P.2548A & AP1186 don't show relationships between parts physical connections and electrical schematic.
Derrick |
2nd Nov 2022, 5:17 pm | #4 |
Nonode
Join Date: May 2007
Location: Preston, Lancashire, UK.
Posts: 2,511
|
Re: R1155N help required please.
Do these diagrams help?
Andy |
2nd Nov 2022, 5:55 pm | #5 |
Diode
Join Date: Nov 2022
Location: Dursley, Gloucestershire, UK.
Posts: 3
|
Re: R1155N help required please.
Andy, looks promising! thank you very much...... It will take me a while to get my head around it but these look great.
Thank you again. Derrick |