|
Vintage Amateur and Military Radio Amateur/military receivers and transmitters, morse, and any other related vintage comms equipment. |
|
Thread Tools |
10th Oct 2012, 4:51 pm | #1 |
Pentode
Join Date: May 2011
Location: Enniskillen, Fermanagh, UK.
Posts: 188
|
"power-up a transmitter" terminology
Long time ago, when the Morse key ruled, a transmitter was on, when the key was pressed down. In the broadcast world I think it used to be "bring the transmitter up". Now I hear talk of keying-up the transmitter. Did this come from the use of a different type of key or some other more interesting reason ? Cliff.
|
12th Oct 2012, 4:39 pm | #2 |
Heptode
Join Date: Jan 2003
Location: Tewkesbury, Gloucestershire, UK.
Posts: 693
|
Re: "power-up a transmitter" terminology
Hi cliff,
Makes no sense to me either....probably American!
__________________
Keith Yates - G3XGW VMARS & BVWS member http://www.tibblestone.com/oldradios/Old_Radios.htm |
12th Oct 2012, 4:50 pm | #3 |
Dekatron
Join Date: Feb 2005
Location: St.Ippolyts, Hitchin, Hertfordshire QRA IO91UW
Posts: 3,517
|
Re: "power-up a transmitter" terminology
Almost certainly American - a lot of Military handbooks refer to a "Keying Line", or a Key socket.....
__________________
Engineers make things work and have spare bits when finished |
12th Oct 2012, 5:22 pm | #4 |
Moderator
Join Date: Jun 2003
Location: Oxford, UK
Posts: 27,937
|
Re: "power-up a transmitter" terminology
Don't UK professional broadcast engineers call them 'senders'?
|
12th Oct 2012, 5:33 pm | #5 |
Heptode
Join Date: Jan 2008
Location: Birchington Kent, UK.
Posts: 596
|
Re: "power-up a transmitter" terminology
|
12th Oct 2012, 6:04 pm | #6 |
Nonode
Join Date: Mar 2010
Location: Dukinfield, Cheshire, UK.
Posts: 2,037
|
Re: "power-up a transmitter" terminology
Older amateurs refer to 'key down' to indicate transmission, which makes sense. Holding down the morse key makes the TX 'go'.
'Keying up' comes from the CB brigade.
__________________
Andy G1HBE. |
13th Oct 2012, 11:13 am | #7 |
Heptode
Join Date: Feb 2008
Location: Great Barr, Sandwell, West Midlands, UK.
Posts: 589
|
Re: "power-up a transmitter" terminology
I first came across 'key' or 'Tx key' as a reference to the pin, relay or line which causes the transmitter to transmit when I started as a comms engineer in the mid-70s. Prior to that I thought it referred to the active Morse key input, although I guess that causes the Tx to transmit too... It is more widely used on fixed eqpt rather than mobiles and portables, which tend to use PTT or Tx.
|
13th Oct 2012, 7:31 pm | #8 |
Dekatron
Join Date: Apr 2012
Location: Wiltshire, UK.
Posts: 13,996
|
Re: "power-up a transmitter" terminology
Those of us who deal with UHF/Microwave datalink transmitters are known to talk about 'defrost' for low-power test transmissions (usually into a dummy-load) and 'cook' for full-power operations.
A test dummy-load is sometimes nicknamed a 'chicken' - as in something-you're-going-to-roast. I'm also familiar with some Brazilians who were described as "sweating the klystrons" when they had antenna problems and so wound their uplink-power on a satellite circuit to rather more than the equipment was officially rated for. |
13th Oct 2012, 11:11 pm | #9 |
Octode
Join Date: Feb 2009
Location: Bletchley, Buckinghamshire, UK.
Posts: 1,219
|
Re: "power-up a transmitter" terminology
|
14th Oct 2012, 11:25 pm | #10 |
Pentode
Join Date: May 2011
Location: Enniskillen, Fermanagh, UK.
Posts: 188
|
Re: "power-up a transmitter" terminology
Thank you all for the replys, I find Sparkie67's pin/relay/line of interest as it appears there are more items than a Morse key to operate the transmitter. Another recent thread elsewhere on this forum, used the term " fire-up " the transmitter. Sounds like rocket-speak from the space race. So I just need to broarden my awareness of current technology. And for G6Tanuki and sweating the klystrons, I remember the aftermath of an exploded Klystron, all I could do was stand and stare. Cliff.
|
15th Oct 2012, 4:29 pm | #11 |
Pentode
Join Date: May 2005
Location: Chelmsford, Essex, UK.
Posts: 150
|
Re: "power-up a transmitter" terminology
"Fire up" probably goes back to when TX's used valves and it took a while to get the Tx ready for full power. Like old valve TV's you needed to "warm them up" before getting a picture !! - oops another term has crept in now
|
15th Oct 2012, 5:24 pm | #12 |
Moderator
Join Date: Jun 2003
Location: Oxford, UK
Posts: 27,937
|
Re: "power-up a transmitter" terminology
I suspect "fire up" derives from the practice of lighting the fire to raise steam in a steam engine.
|
15th Oct 2012, 11:59 pm | #13 |
Dekatron
Join Date: Feb 2007
Location: Leominster, Herefordshire, UK.
Posts: 16,535
|
Re: "power-up a transmitter" terminology
As you would with "Steam Radio".
With a transmitter of course you would tune for maximum smoke. I wonder if "Power up" has anything to do with transatlantic upside down switches?
__________________
....__________ ....|____||__|__\_____ .=.| _---\__|__|_---_|. .........O..Chris....O |