|
Vintage Radio (domestic) Domestic vintage radio (wireless) receivers only. |
|
Thread Tools |
14th Jan 2019, 6:26 pm | #1 |
Guest
Posts: n/a
|
Turning on an EKCO U354
Mine has sat without use for a couple of years, turned it on and it works, no surprises there. Currently have the PM programme received. Even the DM70 glows wonderfully. It is good to have a bit of kit that just works, very well too.
|
14th Jan 2019, 9:41 pm | #2 |
Heptode
Join Date: Sep 2007
Location: Brentwood, Essex, UK.
Posts: 687
|
Re: Turning on an EKCO U354
Yes, these Ekco models seem to be pretty reliable, I found one in a loft tidy up a couple of weeks ago ( same chassis but a brown case anyway) and on plugging it in it still worked fine despite being up there for years.
Steve. |
14th Jan 2019, 9:48 pm | #3 |
Dekatron
Join Date: Sep 2005
Location: Seaford, East Sussex, UK.
Posts: 5,997
|
Re: Turning on an EKCO U354
Merlinmaxwell, if you PM me your address I will pop some user instructions in an envelope for you. The final clearout of my parents house threw up this manual and I did recall they had one of these Ekco's mentioned in a thread on my similar Ekco but that is a U353.
|