|
Vintage Test Gear and Workshop Equipment For discussions about vintage test gear and workshop equipment such as coil winders. |
|
Thread Tools |
26th Oct 2020, 10:56 pm | #1 |
Heptode
Join Date: Nov 2017
Location: London, UK. Bury, Lancashire quite regularly :)
Posts: 611
|
AVO Electronic Test Meter Mk 4 terminals.
Good evening.
I have just acquired one of these (today.) I have an electronic copy of the user and service manual(s.) The HP and LP screw in insulated terminals are both missing. The screw thread appears to be 4BA - (at least a 4BA half inch brass bolt fits.) I have attached an image showing the terminals in situ from an earlier iteration of the design - they are exactly the same in the Mk 4. Would anyone have a clue where one might source suitable replacements? Any information most gratefully received, TIA.
__________________
Thermionic Emission, warms the cockles of your tubes. |