UK Vintage Radio Repair and Restoration Powered By Google Custom Search Vintage Radio Service Data

Go Back   UK Vintage Radio Repair and Restoration Discussion Forum > Offered and Wanted Messages > Sets, Parts and Service Information Wanted (private buyers only, no swaps)

Notices

Sets, Parts and Service Information Wanted (private buyers only, no swaps) If you need help obtaining components, sets or equipment, post a message here. Private buyers only - no traders. No swaps.

Closed Thread
 
Thread Tools
Old 15th Jul 2019, 3:53 pm   #1
ben
Dekatron
 
ben's Avatar
 
Join Date: Aug 2006
Location: Madrid, Spain / Wirral, UK
Posts: 5,651
Default 130 ohm NTC (Mullard VA1040)

Does anybody happen have a 130 ohm NTC thermistor they would part with? Used is OK.

It is for a Tandberg reel to reel. All costs met!
TIA
__________________
Regards,
Ben.
ben is offline  
Old 16th Jul 2019, 3:18 pm   #2
Diabolical Artificer
Dekatron
 
Diabolical Artificer's Avatar
 
Join Date: Jul 2009
Location: Sleaford, Lincs. UK.
Posts: 4,908
Default Re: 130 ohm NTC

Had a quick look in my stash Ben but couldn't find anything, there might be one in my vintage PCB stash, do you have a pic for ease of looking?

Andy.
__________________
Curiosity hasn't killed this cat...so far.
Diabolical Artificer is offline  
Old 16th Jul 2019, 4:28 pm   #3
greg_simons
Heptode
 
greg_simons's Avatar
 
Join Date: Jul 2004
Location: Evesham, Worcestershire, UK.
Posts: 738
Default Re: 130 ohm NTC

I have a small stash as well so a picture would help.
Greg.
__________________
Picture, sound?, DOOR.
greg_simons is offline  
Old 16th Jul 2019, 6:04 pm   #4
ben
Dekatron
 
ben's Avatar
 
Join Date: Aug 2006
Location: Madrid, Spain / Wirral, UK
Posts: 5,651
Default Re: 130 ohm NTC

The part in question has disintegrated, it was burnt to start with so I fear a pic would be of little help. I got the value from the service manual part list.
I can say that anything rated to pass at most an amp would do. Likewise, I suspect I could get away with a 100 ohm variant which seem a bit more common. Thanks so much for the help this far!
__________________
Regards,
Ben.
ben is offline  
Old 17th Jul 2019, 12:19 pm   #5
Restoration73
Octode
 
Restoration73's Avatar
 
Join Date: Jun 2013
Location: Surbiton, SW London, UK.
Posts: 1,747
Default Re: 130 ohm NTC

What you want is a Mullard VA1040, I could post one to you.

Tony
Restoration73 is offline  
Old 19th Jul 2019, 3:32 pm   #6
ben
Dekatron
 
ben's Avatar
 
Join Date: Aug 2006
Location: Madrid, Spain / Wirral, UK
Posts: 5,651
Default Re: 130 ohm NTC

Thanks to Tony , I now have the thermistor - and a working tape recorder! Thank you all for the interest.
__________________
Regards,
Ben.
ben is offline  
Old 19th Jul 2019, 3:45 pm   #7
poppydog
Heptode
 
Join Date: Oct 2015
Location: Cornwall, UK.
Posts: 608
Default Re: 130 ohm NTC

You did a lot better than I did when I wanted one.
poppydog is offline  
Closed Thread

Thread Tools



All times are GMT +1. The time now is 2:58 am.


All information and advice on this forum is subject to the WARNING AND DISCLAIMER located at https://www.vintage-radio.net/rules.html.
Failure to heed this warning may result in death or serious injury to yourself and/or others.


Powered by vBulletin®
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
Copyright ©2002 - 2020, Paul Stenning.