UK Vintage Radio Repair and Restoration Powered By Google Custom Search Vintage Radio Service Data

Go Back   UK Vintage Radio Repair and Restoration Discussion Forum > General Vintage Technology > Hints, Tips and Solutions (Do NOT post requests for help here)


Hints, Tips and Solutions (Do NOT post requests for help here) If you have any useful general hints and tips for vintage technology repair and restoration, please share them here. PLEASE DO NOT POST REQUESTS FOR HELP HERE!

Closed Thread
Thread Tools
Old 25th Jan 2019, 8:56 pm   #1
Join Date: May 2005
Location: London 70% , Burnley 30%
Posts: 329
Default Panasonic PBX programming

You may like to add to the Panasonic PBX thread. We found that Toshiba Laptop COM ports would work, but newer Dell's would not. I don't think we tried the INQ changes as it appeared Dell com ports did not comply with voltage and full standards compared to other laptops. Can anyone confirm what the Dell and Toshiba pin outs were as for com IRQs there are only a choice of of 4 options ? This would be in P200 processor chipsets we didn't have 486 Dell's.
whyperion is offline  
Old 27th Jan 2019, 12:08 am   #2
Join Date: Oct 2014
Location: West Midlands, UK.
Posts: 1,593
Default Re: Panasonic PBX programming

WHYPERION- panasonic KXTD ETC as per from panasonic were set to certain IRQ and even Panasonic Tech support were not aware of the problems that this caused. If you are having problems using a panasonic kxtd PROGRAM and linking to a KXTD, then I'd suggest you look at trying other combinations of settings and IRQ settings.
Oldcodger is offline  
Closed Thread

Thread Tools

All times are GMT +1. The time now is 3:12 pm.

All information and advice on this forum is subject to the WARNING AND DISCLAIMER located at
Failure to heed this warning may result in death or serious injury to yourself and/or others.

Powered by vBulletin®
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
Copyright ©2002 - 2020, Paul Stenning.