Philco 282 'Empire 5' - UK Vintage Radio Repair and Restoration Discussion Forum

Doris The Diode · 7th Feb 2017, 7:44 pm

Dear forum,

I aquired a Philco 282, which unfortunately has been got at by the dreaded repairer!

The set has a different T4 coil, something which has 3 coils on it and is hanging by tape in the radio, and the set has no WT2 coil.
I'm using the Philco Radio Service Bulletin nr 36 as reference and circuit.

I need some help, does any one know what the value of the the inductors are on T4?
Can anyone measure their Philco T4 inductance?
Also, does anyone know the value of WT2 coil?

Any help or novel ideas are welcome.

Regards,
Doris

GeoffK · 10th Feb 2017, 8:18 pm

A couple of pictures might help. WT2 is an image rejector, a coil from a similar design may be suitable.

7th Feb 2017, 7:44 pm	#1
Doris The Diode Tetrode Join Date: Sep 2008 Location: Brighton, East Sussex, UK. Posts: 71	Philco 282 'Empire 5' Dear forum, I aquired a Philco 282, which unfortunately has been got at by the dreaded repairer! The set has a different T4 coil, something which has 3 coils on it and is hanging by tape in the radio, and the set has no WT2 coil. I'm using the Philco Radio Service Bulletin nr 36 as reference and circuit. I need some help, does any one know what the value of the the inductors are on T4? Can anyone measure their Philco T4 inductance? Also, does anyone know the value of WT2 coil? Any help or novel ideas are welcome. Regards, Doris

10th Feb 2017, 8:18 pm	#2
GeoffK Heptode Join Date: Mar 2016 Location: Essex, UK. Posts: 602	Re: Philco 282 'Empire 5' A couple of pictures might help. WT2 is an image rejector, a coil from a similar design may be suitable. __________________ *Geoff*