|
Hints, Tips and Solutions (Do NOT post requests for help here) If you have any useful general hints and tips for vintage technology repair and restoration, please share them here. PLEASE DO NOT POST REQUESTS FOR HELP HERE! |
|
Thread Tools |
14th Jun 2010, 7:07 pm | #1 |
Retired Dormant Member
Join Date: Apr 2003
Location: Salt Spring Island, BC, Canada
Posts: 368
|
Easy DVM measurements
I had to make resistance and voltage (low!) measurements inside a large rack assembly, and with a probe in each hand, I had difficulty propping the DVM where I could read it especially as the DVM had to be reoriented each time I faced a different area of the rack. The solution was to clamp the DVM to the back of my left forearm with a couple of elastic bands. then the DVM was always in easy sight as I moved the two probes around.
John. |
14th Jun 2010, 9:54 pm | #2 |
Dekatron
Join Date: Jan 2003
Location: Bradford on Avon, Wiltshire, UK.
Posts: 3,310
|
Re: Easy DVM measurements
Fantastic!! I love things like that, and I'll remember that trick.
__________________
"Nothing is as dangerous as being too modern;one is apt to grow old fashioned quite suddenly." |