UK Vintage Radio Repair and Restoration Powered By Google Custom Search Vintage Radio Service Data

Go Back   UK Vintage Radio Repair and Restoration Discussion Forum > General Vintage Technology > Components and Circuits

Notices

Components and Circuits For discussions about component types, alternatives and availability, circuit configurations and modifications etc. Discussions here should be of a general nature and not about specific sets.

Closed Thread
 
Thread Tools
Old 4th Sep 2010, 10:49 pm   #1
Steve G4WCS
Hexode
 
Steve G4WCS's Avatar
 
Join Date: Sep 2004
Location: Preston, Lancashire, UK.
Posts: 363
Default decent quality dc power connectors

bit of a modern query this, but a good pool of knowledge on here.

one of the laptops at home ( HP pavilion DV8000) has a stupidly sized ( I think its 4.3mm) power connector. the original moulded connector has failed, and the only replacement available in that size seems to be from maplins, of course it's made in china and up to usual standards, and have gone through 3 connectors in the last 12 months.

does anyone know a source of decent power connectors ??
Steve G4WCS is offline  
Old 7th Sep 2010, 2:27 pm   #2
Lee.Wilkerson
Diode
 
Lee.Wilkerson's Avatar
 
Join Date: Sep 2010
Location: Lexington, Kentucky, USA
Posts: 6
Default Re: decent quality dc power connectors

Try Switchcraft. Also Mouser Electronics has this kind of thing. Are you breaking the connectors? Maybe you should try to fabricate some kind of shield or just remember to unplug before you stow it.

~/Lee
Lee.Wilkerson is offline  
Closed Thread

Thread Tools



All times are GMT +1. The time now is 3:26 pm.


All information and advice on this forum is subject to the WARNING AND DISCLAIMER located at https://www.vintage-radio.net/rules.html.
Failure to heed this warning may result in death or serious injury to yourself and/or others.


Powered by vBulletin®
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
Copyright ©2002 - 2020, Paul Stenning.