|
|
|
|
|||||||
| Vintage Radio (domestic) Domestic vintage radio (wireless) receivers only. |
 |
|
|
Thread Tools |
5th Aug 2019, 10:09 pm
|
#1 |
|
Retired Dormant Member
Join Date: Mar 2010
Location: Carlisle, UK.
Posts: 164
|
Philips 834a alignment procedure .
Does anyone know how to do this on the 834a please .
|
|
|
6th Aug 2019, 1:58 pm
|
#2 |
|
Dekatron
Join Date: Nov 2003
Location: Heckmondwike, West Yorkshire, UK.
Posts: 9,642
|
Re: Philips 834a alignment procedure .
It's in the Trader sheet: https://www.service-data.com/product...54/5968/t14854
|
|
|
|
9th Aug 2019, 5:07 pm
|
#3 |
|
Retired Dormant Member
Join Date: Mar 2010
Location: Carlisle, UK.
Posts: 164
|
Re: Philips 834a alignment procedure .
Bought guess which part of the page isn't scanned properly ??
|
|
|
|
9th Aug 2019, 6:08 pm
|
#4 |
|
Dekatron
Join Date: Nov 2003
Location: Heckmondwike, West Yorkshire, UK.
Posts: 9,642
|
Re: Philips 834a alignment procedure .
Unfortunately, the scan on the disk issued to BVWS members is the same. Unless a forum member has a paper copy, that seems to be all there is.
|
|
|
|
9th Aug 2019, 6:25 pm
|
#5 | |
|
Dekatron
Join Date: Apr 2011
Location: Cornwall, UK.
Posts: 13,454
|
Re: Philips 834a alignment procedure .
Quote:
Signal generator connected between A1 or A2 and earth, receiver switched to MW, tune receiver to 225 Metres, generator set to 1,330kHz, gain control to max, adjust sig gen output for min usable while adjusting C19 & C21 for maximum output. Switch to LW, tune receiver to 900 Metres, set generator to 333.3kHz and adjust C20 for maximum output. Check calibration on both wavebands. Lawrence. |
|
|
|
|
10th Aug 2019, 5:46 pm
|
#6 |
|
Rest in Peace
Join Date: Mar 2011
Location: Basildon, Essex, UK.
Posts: 4,100
|
Re: Philips 834a alignment procedure .
As Lawrence said.
Image from Radio Museum. Mike |
|
|
