|
Sets and Parts Wanted (private buyers only, no swaps) If you need help obtaining components, sets or equipment, post a message here. Private buyers only - no traders. No swaps. |
|
Thread Tools |
31st Jan 2024, 7:10 pm | #1 |
Pentode
Join Date: Nov 2005
Location: Crewe, Cheshire, UK.
Posts: 138
|
Bulgin mains plug PX0770 needed
Help - one plug needed for restoration of Crimson Elektrik amp/preamp.
It is a mains plug 6A/250V reverse IEC Bulgin type PX0770. Picture in attached Word document. happy to meet costs/postage. Thanks in advance, Roger G4BZI |
1st Feb 2024, 8:20 am | #2 |
Dekatron
Join Date: Jul 2009
Location: Sleaford, Lincs. UK.
Posts: 7,676
|
Re: Bulgin mains plug PX0770 needed
Sure I've got one somewhere, but where? I'll try & find it, drop me a PM if you've had no joy in a few days.
Andy.
__________________
Curiosity hasn't killed this cat...so far. |
1st Feb 2024, 12:13 pm | #3 |
Hexode
Join Date: Jan 2015
Location: Bishop Auckland, County Durham, UK.
Posts: 402
|
Re: Bulgin mains plug PX0770 needed
Good morning Roger,
Although not actually Bulgin plugs, these look to be exactly the same. They look to be QED's take on the plug. They have a QED part number of 9/3 if that helps. I have a number of these, you are welcome to one or more free of charge. I also have some Bulgin R670 which look the same but without the spigot. Kind regards, David |
1st Feb 2024, 10:46 pm | #4 |
Dekatron
Join Date: Jan 2012
Location: Brentwood, Essex, UK.
Posts: 5,356
|
Re: Bulgin mains plug PX0770 needed
I understand that the spigot was added after it was belatedly discovered that the original spigotless plug could be mis-mated with a standard IEC socket with one of the L or N pins of the plug in the groove that accommodated the shroud of the standard IEC plug, and the E pin in either the L or N contact of the socket, a potentially lethal condition.
|
6th Feb 2024, 2:41 pm | #5 |
Pentode
Join Date: Nov 2005
Location: Crewe, Cheshire, UK.
Posts: 138
|
Re: Bulgin mains plug PX0770 needed
Plug obtained - thanks to Wartime sounds.
Mods - please close thread. Roger G4BZI |