UK Vintage Radio Repair and Restoration Powered By Google Custom Search Vintage Radio Service Data

Go Back   UK Vintage Radio Repair and Restoration Discussion Forum > Specific Vintage Equipment > Vintage Amateur and Military Radio

Notices

Vintage Amateur and Military Radio Amateur/military receivers and transmitters, morse, and any other related vintage comms equipment.

Closed Thread
 
Thread Tools
Old 15th May 2004, 8:08 pm   #1
JHGibson
Hexode
 
Join Date: Apr 2003
Location: Salt Spring Island, BC, Canada
Posts: 364
Default Testing PT15 (T1154) transmitting valves

I would like to test the PT15 output valves in my T1154. They have the old 5 pin base. I was considering making a lash-up test circuit for them but wondered if they could be checked in a standard receiving valve tester like the AVO?
JHGibson is offline  
Old 15th May 2004, 9:10 pm   #2
jim_beacon
Heptode
 
jim_beacon's Avatar
 
Join Date: Mar 2003
Location: Bishop's Waltham, Hants, UK.
Posts: 939
Default Re: Testing PT15 transmitting valves

They can be done in the Valve Characteristic meters and I think, the CT160, but draw too much heater current for the "two panel" tester.

Jim.
__________________
Jim Beacon G1JBG
www.g1jbg.co.uk

Last edited by Station X; 27th Dec 2004 at 9:49 pm. Reason: Import
jim_beacon is offline  
Closed Thread

Thread Tools



All times are GMT +1. The time now is 8:38 am.


All information and advice on this forum is subject to the WARNING AND DISCLAIMER located at https://www.vintage-radio.net/rules.html.
Failure to heed this warning may result in death or serious injury to yourself and/or others.


Powered by vBulletin®
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
Copyright ©2002 - 2018, Paul Stenning.