UK Vintage Radio Repair and Restoration Powered By Google Custom Search Vintage Radio and TV Service Data

Go Back   UK Vintage Radio Repair and Restoration Discussion Forum > Specific Vintage Equipment > Vintage Telephony and Telecomms

Notices

Vintage Telephony and Telecomms Vintage Telephones, Telephony and Telecomms Equipment

Closed Thread
 
Thread Tools
Old 12th Mar 2021, 6:35 pm   #1
JohnBHanson
Heptode
 
Join Date: Aug 2009
Location: Worthing, Sussex, UK.
Posts: 661
Default GEC Loudspeaking telephone

I have one of these, but little infomation on it:-

https://www.britishtelephones.com/gec/tel1l.htm

Ideally I would like a circuit
diagram or a connection diagram - but any infomation would be useful -
especially about the jumpers inside. Thank you.

I am sure someone somewhere has diagrams for this.

Thanks.
JohnBHanson is offline  
Old 13th Mar 2021, 12:23 pm   #2
Pellseinydd
Heptode
 
Join Date: Jul 2007
Location: Flintshire, UK.
Posts: 707
Default Re: GEC Loudspeaking telephone

More info about the GPO version (produced by GEC) at https://britishtelephones.com/lst2.htm

Circuit diagrams of GPO version available to Telecoms Heritage Group members via BT Archives
Pellseinydd is offline  
Old 23rd Mar 2021, 10:50 pm   #3
JohnBHanson
Heptode
 
Join Date: Aug 2009
Location: Worthing, Sussex, UK.
Posts: 661
Default Re: GEC Loudspeaking telephone

Looking at the circuit diagrams of the LST2a and LST2b tells an interesting
story - the optimisation of the line circuit for single line working including
the change from using relays to using contacts on the ans switch.

Very interesting.
JohnBHanson is offline  
Old 7th Apr 2021, 9:38 pm   #4
JohnBHanson
Heptode
 
Join Date: Aug 2009
Location: Worthing, Sussex, UK.
Posts: 661
Default Re: GEC Loudspeaking telephone

Still not found the required circuit diagram, but LST2 is helpful as I think the amplifier section is similar or maybe even the same.

Anyone out there that can post the correct diagram would be nice.

Thanks.
JohnBHanson is offline  
Closed Thread

Thread Tools



All times are GMT +1. The time now is 9:53 am.


All information and advice on this forum is subject to the WARNING AND DISCLAIMER located at https://www.vintage-radio.net/rules.html.
Failure to heed this warning may result in death or serious injury to yourself and/or others.


Powered by vBulletin®
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Copyright ©2002 - 2023, Paul Stenning.