UK Vintage Radio Repair and Restoration Powered By Google Custom Search Vintage Radio and TV Service Data

Go Back   UK Vintage Radio Repair and Restoration Discussion Forum > Other Discussions > Homebrew Equipment

Notices

Homebrew Equipment A place to show, design and discuss the weird and wonderful electronic creations from the hands of individual members.

Closed Thread
 
Thread Tools
Old 23rd Oct 2010, 7:39 am   #1
6AL5W-Martin
Hexode
 
Join Date: Nov 2006
Location: Biedenkopf, [Hessen], Germany.
Posts: 424
Default Building a tube Ghetto Blaster

hello friends,
after a very long time of planing I have started to build a homebrew tube Radio in "ghetto blaster desgin".

My idea was, to have this very special case design.

The plan...

AM/FM stereo superhet with IF 455kHz AM and IF 10,7mc FM, including tube stereo decoder and "3D Sound".

3D sound, some old german radios use this, is simply to insert additional 2 speakers in the right and left side of the case,
the sound power amp use 3 transformers, one SE for left, one SE for right, and a center PP for front, all this with only 2 power tubes.
I will do it with 6AQ5 = EL90.

The special problem to build a ghetto blaster design is the very small space inside, the project will not go without exactly mechanical plan and design.

The Deepness of the case cannot be large, a question of design.
So I made the construction :

<--> 500mm
height: 200mm
deep: only 125mm ( 1" = 25.4mm)

The "buttons" have to look like cassette player buttons of a ghetto blaster..
The tuning scale, I decidet to make a hallicrafters design to it.
The magical eye tube, small and nice, EAM86
Upside a cover, containig the ferrite antenna, cooling, pots.
2 telescope antennas.
wood case for good tube sound. Black glossy painting.
aluminium parts for small weight.
a lot of fun and a lot of time !

Now, start
When I`m finished, I will give exactly plan of construction for a easy rebuild.

greetings
Martin
Attached Thumbnails
Click image for larger version

Name:	kofferchen 001.JPG
Views:	522
Size:	74.6 KB
ID:	41784   Click image for larger version

Name:	kofferchen 005.JPG
Views:	515
Size:	71.6 KB
ID:	41785  

Last edited by 6AL5W-Martin; 23rd Oct 2010 at 7:54 am.
6AL5W-Martin is offline  
Old 23rd Oct 2010, 7:51 am   #2
raditechman
Heptode
 
raditechman's Avatar
 
Join Date: Feb 2007
Location: West London, UK.
Posts: 865
Default Re: building a tube ghetto blaster

Look forward to seeing some photos when it is finished. Hope you have got room for batteries, assuming it is portable.

John
raditechman is offline  
Old 23rd Oct 2010, 8:38 am   #3
fidobsa
Retired Dormant Member
 
fidobsa's Avatar
 
Join Date: Mar 2009
Location: Zala, Hungary
Posts: 418
Default Re: building a tube ghetto blaster

Yes, if it's as loud as it looks you may need big batteries!
fidobsa is offline  
Old 23rd Oct 2010, 9:55 am   #4
6AL5W-Martin
Hexode
 
Join Date: Nov 2006
Location: Biedenkopf, [Hessen], Germany.
Posts: 424
Default Re: building a tube ghetto blaster

I think that will not be possible,
this radio will blow out 6 to 8 Watt, what means, with battery tubes it`s not possible.
a 6AQ5 will eat roundabout 10Watt Anode + 3A heating, there are 2 ...

Maybe I use a seperate Bag with 12V7Ah and a low cost transverter.
The radio self, 230v~

greetings
Martin
6AL5W-Martin is offline  
Old 23rd Oct 2010, 10:05 am   #5
Guest
Guest
 
Posts: n/a
Default Re: building a tube ghetto blaster

I used to do that, build the box first and then try to fit it all in. Always ended up with a very cramped bit at the end.
 
Old 23rd Oct 2010, 12:55 pm   #6
AlanBeckett
Rest in Peace
 
Join Date: Dec 2008
Location: Burton upon Trent, East Staffordshire, UK.
Posts: 1,686
Default Re: building a tube ghetto blaster

In my younger days, when working for a well known hi-fi manufacturer, that was always how it was done. Marketing said 'This is the size/shape/colour/facilities we want' and the Designers had to get it all in.
It wasn't always an unqualified success
Alan
AlanBeckett is offline  
Old 23rd Oct 2010, 5:26 pm   #7
Mike Brett
Retired Dormant Member
 
Join Date: Dec 2005
Location: Wisbech, Cambridgeshire, UK.
Posts: 452
Default Re: building a tube ghetto blaster

The case looks a really strong job, but a bit risky to build this first. I would start with a large chassis then work from the centre outwards,get the design working ,then trim the chassis to minimum requirements. A bit tedious I know but it could save a lot of frustration.
Good luck anyway. Mike
Mike Brett is offline  
Old 23rd Oct 2010, 7:31 pm   #8
Herald1360
Dekatron
 
Herald1360's Avatar
 
Join Date: Feb 2007
Location: Leominster, Herefordshire, UK.
Posts: 16,528
Default Re: building a tube ghetto blaster



Wouldn't it be easier to start from one end- then you would only need to trim off one bit
__________________
....__________
....|____||__|__\_____
.=.| _---\__|__|_---_|.
.........O..Chris....O
Herald1360 is offline  
Old 23rd Oct 2010, 7:50 pm   #9
Boom
Retired Dormant Member
 
Join Date: Jan 2007
Location: Westbury, Wiltshire, UK.
Posts: 2,451
Default Re: building a tube ghetto blaster

You could always use something like an ELL80 (?) to get the valve count down. I'm not sure but think there is a triode/twin pentode valve, maybe an ECLL80? too.
Boom is offline  
Old 23rd Oct 2010, 9:25 pm   #10
Sideband
Dekatron
 
Sideband's Avatar
 
Join Date: Oct 2003
Location: Croydon, Surrey, UK.
Posts: 7,550
Default Re: building a tube ghetto blaster

Quote:
Originally Posted by Boom View Post
I'm not sure but think there is a triode/twin pentode valve, maybe an ECLL80? too.
It was an ECLL800 with, I think, a common cathode for all three sections.



SB
__________________
There are lots of brilliant keyboard players and then there is Rick Wakeman.....
Sideband is offline  
Old 23rd Oct 2010, 10:14 pm   #11
Michael Maurice
Moderator
 
Michael Maurice's Avatar
 
Join Date: Feb 2006
Location: Wembley, Middlesex
Posts: 7,219
Default Re: building a tube ghetto blaster

If it has a common cathode, you wont be able to use the triode section as a phase splitter, assuming of course you wanted push pull output stages.
Michael Maurice is offline  
Old 23rd Oct 2010, 11:47 pm   #12
AlanBeckett
Rest in Peace
 
Join Date: Dec 2008
Location: Burton upon Trent, East Staffordshire, UK.
Posts: 1,686
Default Re: building a tube ghetto blaster

The rsdiomuseum doesn't agree - see
http://www.radiomuseum.org/tubes/tube_ecll800.html
However, it does depend on your definition of phase splitter.
Alan
AlanBeckett is offline  
Old 24th Oct 2010, 12:55 am   #13
Herald1360
Dekatron
 
Herald1360's Avatar
 
Join Date: Feb 2007
Location: Leominster, Herefordshire, UK.
Posts: 16,528
Default Re: building a tube ghetto blaster

Clever! Presumably the triode only manages unity gain. It must have a low gm, ra or both.
__________________
....__________
....|____||__|__\_____
.=.| _---\__|__|_---_|.
.........O..Chris....O
Herald1360 is offline  
Old 24th Oct 2010, 7:39 am   #14
6AL5W-Martin
Hexode
 
Join Date: Nov 2006
Location: Biedenkopf, [Hessen], Germany.
Posts: 424
Default Re: building a tube ghetto blaster

hello Friends,

ELL80 and ECLL800 are tubes with a short life time, also they are rare and very expensive.
So i decidet to 6AQ5 (7pin), a low cost tube with enough output.
EL95 (=a half ELL80) is better, only 0,2a filament, but it requires 10k A-A

greetings
Martin
6AL5W-Martin is offline  
Old 24th Oct 2010, 9:04 am   #15
Michael Maurice
Moderator
 
Michael Maurice's Avatar
 
Join Date: Feb 2006
Location: Wembley, Middlesex
Posts: 7,219
Default Re: building a tube ghetto blaster

I stand corrected!

Ingenious
Michael Maurice is offline  
Old 24th Oct 2010, 12:23 pm   #16
radiotircoed
Pentode
 
radiotircoed's Avatar
 
Join Date: Nov 2005
Location: Tircoed Forest Village - Swansea, UK.
Posts: 193
Default Re: building a tube ghetto blaster

Can't wait to see the finished system...

Bob W
__________________
Radio Tircoed - Working for the Community
radiotircoed is offline  
Old 24th Oct 2010, 4:42 pm   #17
6AL5W-Martin
Hexode
 
Join Date: Nov 2006
Location: Biedenkopf, [Hessen], Germany.
Posts: 424
Default Re: building a tube ghetto blaster

one of the tricks to keep space is, to put the filters in downside of the chassis,
they must not have case, only a little aluminium separation plate. Some filter coils can be wired on amidon toroids (not all).
The (hot..) audio stage will be flown upsid, behind the scaling.
I have planed in Corel, but its a fight for every space

But the switching area will look , like most tube radios, not so perfect, short wires and a lot of coils there

greetings
Martin

Last edited by 6AL5W-Martin; 24th Oct 2010 at 4:50 pm.
6AL5W-Martin is offline  
Old 25th Oct 2010, 9:04 am   #18
Mike Brett
Retired Dormant Member
 
Join Date: Dec 2005
Location: Wisbech, Cambridgeshire, UK.
Posts: 452
Default Re: building a tube ghetto blaster

Sorry Chris, starting from one end and trimming off the other would not work, perhaps I should explain. I place all the major components on a large sheet of aluminium and when I am happy with the layout I cut all the holes for the valve sockets transformers ect. This is far easier to do anyway on a flat sheet than on a folded up box. I then trim and fold the sides to form the chassis, both operations being done with a Warco bending jig. Admittedly this method does produce a small amount of waste but not as much as finding you have to start from scratch as you find you cannot fit everything in.
Mike
Mike Brett is offline  
Old 27th Oct 2010, 6:44 am   #19
6AL5W-Martin
Hexode
 
Join Date: Nov 2006
Location: Biedenkopf, [Hessen], Germany.
Posts: 424
Default Re: building a tube ghetto blaster

Continue

The "buttons" have to look like cassette player buttons of a ghetto blaster.. ... done.
next step comming soon: Dial.

greetings
Martin
Attached Thumbnails
Click image for larger version

Name:	gb 003.JPG
Views:	357
Size:	80.0 KB
ID:	41938  

Last edited by 6AL5W-Martin; 27th Oct 2010 at 6:49 am.
6AL5W-Martin is offline  
Old 27th Oct 2010, 7:46 am   #20
JimMac53
Hexode
 
JimMac53's Avatar
 
Join Date: Apr 2009
Location: Naples, Florida, USA
Posts: 255
Default Re: building a tube ghetto blaster

Add a spot for an iPod dock or at the very least an iPod/mp3 input. Looks great.
__________________
Jim Mac
JimMac53 is offline  
Closed Thread

Thread Tools



All times are GMT +1. The time now is 12:37 pm.


All information and advice on this forum is subject to the WARNING AND DISCLAIMER located at https://www.vintage-radio.net/rules.html.
Failure to heed this warning may result in death or serious injury to yourself and/or others.


Powered by vBulletin®
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Copyright ©2002 - 2023, Paul Stenning.