|
Vintage Test Gear and Workshop Equipment For discussions about vintage test gear and workshop equipment such as coil winders. |
|
Thread Tools |
12th Jul 2016, 8:16 pm | #41 |
Pentode
Join Date: Jun 2014
Location: Amersham, Buckinghamshire, UK.
Posts: 147
|
Re: Marconi TF2438 Universal Counter/Timer
Richard & Mark,
Success ! I've re-flowed all of those through-hole rivets and used some switch cleaner on the pushbuttons. It seems so much better, though I might give the other side a going over too. Thanks for all your advise, it has been invaluable. Regards, Thomas Last edited by thomass; 12th Jul 2016 at 8:20 pm. Reason: added picture |
12th Jul 2016, 10:12 pm | #42 |
Dekatron
Join Date: Jul 2007
Location: Evesham, Worcestershire, UK.
Posts: 4,244
|
Re: Marconi TF2438 Universal Counter/Timer
Excellent news
|
15th Jul 2016, 9:52 pm | #43 |
Pentode
Join Date: Jun 2014
Location: Amersham, Buckinghamshire, UK.
Posts: 147
|
Re: Marconi TF2438 Universal Counter/Timer
Well it definitely seems better, I realise why there was a post-it note covering the transformer mounting. I think the other connector which allows for servicing along the back of the top pcb was shorting out, so I have insulated the metal with kapton tape.
|