5th Sep 2016, 9:22 am | #181 |
Heptode
Join Date: Mar 2016
Location: Essex, UK.
Posts: 602
|
Re: Philips B3G63A
Would have been nicer to have retained the original speaker, for the original sound as well as appearance. The original speaker doesn't look to be damaged at all.
|
5th Sep 2016, 11:05 am | #182 |
Octode
Join Date: Mar 2006
Location: Watford, Hertfordshire, UK.
Posts: 1,270
|
Re: Philips B3G63A
Don't forget that mains lead clamp
__________________
Whether the Top Cap is Grid or Anode - touching it will give you a buzz either way! |
5th Sep 2016, 1:51 pm | #183 |
Octode
Join Date: Aug 2015
Location: Glasgow, UK.
Posts: 1,850
|
Re: Philips B3G63A
Found it thanks - as you said, under VALVEHOLDERS - Screen for V2.
I suppose my concerns about heat build up are misplaced if this part was fitted in the original - it must have been at some point and has just fallen out/got displaced. Only got the small metal plate with a screw to find a home for now? By the way, the hum has disappeared - caused by having the set too close to our cordless phone base station! |
5th Sep 2016, 2:00 pm | #184 |
Dekatron
Join Date: Apr 2011
Location: Cornwall, UK.
Posts: 13,454
|
Re: Philips B3G63A
Most B9A valves in TV tuners had valve screens/shields fitted.
Lawrence. |
7th Sep 2016, 1:47 pm | #185 | |
Octode
Join Date: Aug 2015
Location: Glasgow, UK.
Posts: 1,850
|
Re: Philips B3G63A
Quote:
It's the small metal plate and screw that supported C65 (a large 100μF electrolytic capacitor) and C59 (a Philips black pitch type 0.015μF capacitor) and attached to the chassis using a "waxy paper harness). As you can see from the attached picture there was leakage around the bottom of this "harness" and these caps were replaced along with all the other leaky black pitch types. So the small metal plate with a screw are now redundant as the new caps are so much smaller and self-supporting - but I think I'll just put them back in place for completeness. ***THE END*** |
|