UK Vintage Radio Repair and Restoration Powered By Google Custom Search Vintage Radio and TV Service Data

Go Back   UK Vintage Radio Repair and Restoration Discussion Forum > General Vintage Technology > Websites

Notices

Websites Found an interesting website? Post the details here and share it with the rest of us. Please stick to websites that are in some way related to our hobby/interest.

Reply
 
Thread Tools
Old 22nd Jun 2023, 11:25 am   #1
G.Castle
Heptode
 
Join Date: Dec 2020
Location: Swaffham, Norfolk, UK.
Posts: 520
Default Printed circuits

For anyone who hasn't seen it, here's an interesting video about specialist manufacture of potted and printed circuit manufacturing from the 1950's.

https://youtu.be/AzLCr2ZBIgQ
G.Castle is offline   Reply With Quote
Old 22nd Jun 2023, 11:55 am   #2
Phil__G
Heptode
 
Join Date: Mar 2011
Location: North Yorkshire, UK.
Posts: 920
Default Re: Printed circuits

Whenever I've split potted items (curiosity) its been vero or tagstrip inside!!!
Phil__G is offline   Reply With Quote
Old 27th Jun 2023, 1:37 pm   #3
Vintage Engr
Heptode
 
Join Date: Jan 2008
Location: Shrewsbury, Shropshire, UK.
Posts: 734
Default Re: Printed circuits

Fascinating, apart from the actual content I immediately recognised the name of the sound recordist, Alan Tutchings; he used to regularly provide articles for the now long-gone "Tape Recorder" magazine.
Then near the end the film a resume of the 'state-of-the -art' by Professor GWA Dummer. I have a couple of books by him, the only one I could immediately find was 'Miniature & microminiature electronics', by which time the transistor had appeared & made miniaturisation so much easier.

Then of course from an historical point of view, the very mention of TRE brings back days of my youth, when I purchased (too much) ex-WD gear. Sometimes if I was lucky enough, I would buy a brand-new still sealed-in-box item, which would have a typewritten manual, published by TRE Malvern, with the word "RESTRICED" on the front page!

Also mentioned in the film, was Elliot Automation. When I moved from domestic TV servicing into broadcast engineering, we still used Elliot 'Minilog' potted circuit blocks in SPG's & associated equipment. Philips also used their own version of these in SPG's subcarrier generators etc. The nice thing about those, was that I could successfully break them open, & repair a whole flip-flop! They were potted into plastic boxes of various colours, which also identified in part, the function of the circuit block. Some even had AC128's in them..

What a lot of memories stirred up by a short film.

David.
Vintage Engr is offline   Reply With Quote
Reply

Thread Tools



All times are GMT +1. The time now is 10:58 pm.


All information and advice on this forum is subject to the WARNING AND DISCLAIMER located at https://www.vintage-radio.net/rules.html.
Failure to heed this warning may result in death or serious injury to yourself and/or others.


Powered by vBulletin®
Copyright ©2000 - 2023, vBulletin Solutions, Inc.
Copyright ©2002 - 2023, Paul Stenning.