UK Vintage Radio Repair and Restoration Powered By Google Custom Search Vintage Radio and TV Service Data

Go Back   UK Vintage Radio Repair and Restoration Discussion Forum > General Vintage Technology > Cabinet and Chassis Restoration and Refinishing

Notices

Cabinet and Chassis Restoration and Refinishing For help with cabinet or chassis restoration (non-electrical), please leave a message here.

Closed Thread
 
Thread Tools
Old 15th May 2020, 8:58 pm   #1
tri-comp
Heptode
 
Join Date: Oct 2008
Location: Aalborg, Denmark
Posts: 903
Default EM84 Mounting Bezel

Hi,

Has anyone here done a 3D-print of a mounting Bezel for an EM84 (or other) magic eye valve ?
Originally they were done in bakelite, plastic or even brass and the valve was usually fixed against the rear of the Bezel with a coiled spring wrapped around the valve.
Cheap 3D-printing would of course be done in plastic but metal-printing is also a choice if you can afford it, se the attached picture. This Bezel was even gilded in 9ct. gold. (Picture taken from the Internet)

Rgds,

/Torben
Attached Thumbnails
Click image for larger version

Name:	EM84 Bezel.jpg
Views:	124
Size:	30.4 KB
ID:	205920  
tri-comp is offline  
Closed Thread

Thread Tools



All times are GMT +1. The time now is 5:01 pm.


All information and advice on this forum is subject to the WARNING AND DISCLAIMER located at https://www.vintage-radio.net/rules.html.
Failure to heed this warning may result in death or serious injury to yourself and/or others.


Powered by vBulletin®
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Copyright ©2002 - 2023, Paul Stenning.