Feet. Tiltable and round cabinet and instrument plastic feet

[robinshack]

No Hat.
Buy one or more lots. All need to go!
0-100g £1.50
100-250g maximum as my large letter. £2.10
As well as padded bag, a stiffening piece of card and bubblewrap will add to the net weight.
State first on here then pm me please with your email address plus your name and postal address.

1) One pair as shown, tilt feet, unused afaik. Complete with A2 4mm nut and bolt. Good quality items. I think these were intended for use on Schroff cabinets, but never fitted?
1 set net wt 35g
£2 ONE set of the 4 pieces. 15 sets available.

2) One set (2 available) chrome metal tilt bar and the hinge fixing and 2 round rear feet. 1 set net wt 65g
£2 ONE set.

3) Cone shaped plastic feet, 16mm approx at base. Unused afaik. Qty 16.
TWO lots of 16 available, take one or both. 16 pack net wt 35g
£1.50 the 16

4) Round, hard plastic feet, 23mm dia approx, qty 12 only. Pretty strong.
£1.50 the 12. Net wt 60g

I also have various fuses as offered yesterday and some valve bases to come later today if you want to save on postage by using a parcel for more items.

Payment by Bank transfer, Paypal friends/family or cheque.

Thanks,
Rob

[Steve_Bell]

I would like one set of:

3) Cone shaped plastic feet

Thanks. PM on its way.

[robinshack]

Item 1, Just two sets maximum as large letter due to a tight fit in the 25 mm thickness when packed. More, plus adding other parts will fit as a small parcel ok.

Item 3, just one set of 16 left.

Rob

[turretslug]

Hi Rob, I'd like to buy 2 sets of item 1, the tilt feet, please, as well as the merry bundle of fuses listed in another post,

Thanks, Colin.

[robinshack]

Last chance!
Rob

[chriswood1900]

Rob
Can I please have 2 sets of Item 1 and 1 lot of 16 of item 3 if still available.


Please PM me with the total cost and how you would like to be paid.
Thanks

[factory]

If they haven't gone, could I please have both sets of item 2, they look useful for test gear.

David

[robinshack]

Both offered to David now.
Thanks, Rob

[mervyn]

was there any more of the tilt feet (item 1)
if so could i have 2 sets
regards
Merv

[robinshack]

Yes, ten sets available still. I just sent a pm.
Rob

[Vintage Engr]

If available, 2 sets of item 1 please,

Thanks,

David.

[robinshack]

PM sent to Merv and David.

Rob

[robinshack]

Existing requests now in hand.
Mods, please now close this thread as need to clear everything away.
Thanks, Rob