|
Success Stories If you have successfully repaired or restored a piece of equipment, why not write up what you did and post details here. Particularly if it was interesting, unusual or challenging. PLEASE DO NOT POST REQUESTS FOR HELP HERE! |
|
Thread Tools |
12th Aug 2013, 8:17 pm | #1 |
Heptode
Join Date: May 2003
Location: Bexhill on Sea, East Sussex, UK.
Posts: 746
|
Revox C9 connector
I have a few Revox A77 and B&O recorders but only two C9 type mains connectors. It was annoying to have to keep changing the mains leads over depending on which recorder I was using.
Whilst mowing the lawn { Boring! }. I noticed that the Flymo connector had similar spacing between the pins. So I checked it with Revox C9 lead. The spacing was close so I managed to pick up a couple of Flymo leads at the local boot fair ,£1 and 50P.. I cut the plug as pic and tried it out on my Revox and it worked a treat... I am aware that new C9 type connecorts are available but to buy enough for my recorders would expensive. Only problem I have found is that Flymo now use direct wired leads on there mowers..so the plugs might only be found in boot sales . Peter W........Reelguy |
12th Aug 2013, 8:22 pm | #2 |
Heptode
Join Date: May 2003
Location: Bexhill on Sea, East Sussex, UK.
Posts: 746
|
Revox C9 connector
And a couple more pics...
Peter W......Reelguy |
13th Aug 2013, 12:56 pm | #3 |
Dekatron
Join Date: Feb 2007
Location: Leominster, Herefordshire, UK.
Posts: 16,535
|
Re: Revox C9 connector
Neat!
Anyone got any good ideas for a Pressac job for a Hacker Centurion? Three push on Lucars is a bit bodgy even by my standards
__________________
....__________ ....|____||__|__\_____ .=.| _---\__|__|_---_|. .........O..Chris....O |
15th Aug 2013, 10:06 am | #4 |
Dekatron
Join Date: Jun 2013
Location: East Sussex, UK.
Posts: 3,326
|
Re: Revox C9 connector
Just found, whilst wasting time playing with internet, C9 re-wireable sockets.
Morvan Trading. Andover, Hants. |