UK Vintage Radio Repair and Restoration Powered By Google Custom Search Vintage Radio Service Data

Go Back   UK Vintage Radio Repair and Restoration Discussion Forum > General Vintage Technology > Hints, Tips and Solutions (Do NOT post requests for help here)


Hints, Tips and Solutions (Do NOT post requests for help here) If you have any useful general hints and tips for vintage technology repair and restoration, please share them here. PLEASE DO NOT POST REQUESTS FOR HELP HERE!

Closed Thread
Thread Tools
Old 12th Apr 2013, 11:47 am   #1
Join Date: Dec 2003
Location: Leeds, West Yorkshire, UK.
Posts: 1,157
Default Loctite putty for small repairs

Hi. I have had two Bush DAC90A radios, where the cabinet has been damaged in small area under the dial glass (no the glass was not damaged). I have found that the Two-part putty that comes in a tub, and manufactured by Loctite, comes in very handy for small jobs like this. Afterwards, I used Revell gloss paint black and brown, mixed a small amount to cover the filled surface (will let you know the paint numbers that Revell use later).
I can not understand what folks do to damage the DAC90A cabinets in the space under the dial glass (must be carelessness).
telstar is offline  
Closed Thread

Thread Tools

All times are GMT +1. The time now is 4:32 pm.

All information and advice on this forum is subject to the WARNING AND DISCLAIMER located at
Failure to heed this warning may result in death or serious injury to yourself and/or others.

Powered by vBulletin®
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
Copyright ©2002 - 2020, Paul Stenning.