UK Vintage Radio Repair and Restoration Powered By Google Custom Search Vintage Radio Service Data

Go Back   UK Vintage Radio Repair and Restoration Discussion Forum > Specific Vintage Equipment > Vintage Test Gear and Workshop Equipment

Notices

Vintage Test Gear and Workshop Equipment For discussions about vintage test gear and workshop equipment such as coil winders.

Reply
 
Thread Tools
Old 14th Apr 2020, 7:43 pm   #1
playtape
Diode
 
Join Date: Sep 2018
Location: Bristol, UK.
Posts: 3
Default Wayne Kerr B221 connection help, please

Hi all,

I would like help regarding the "E" and "I" connections that are on an old capacitance bridge (Wayne Kerr B221) from the 1960s.

I'm following some very old test instructions which tell me to use the B221, however I only have access to a slightly more modern Wayne Kerr 6525 (from the 1990s). This unit has four inputs, none of which are labelled "E" or "I".

Can someone please provide me with some information?

Thank you very much.
playtape is offline   Reply With Quote
Old 14th Apr 2020, 7:54 pm   #2
chriswood1900
Heptode
 
Join Date: Jan 2007
Location: Bristol, UK.
Posts: 883
Default Re: Wayne Kerr B221 connection help, please

You can find the manual here.
http://bama.edebris.com/manuals/wayne/b221
That should help.
__________________
Chris Wood
BVWS Member
Don't forget RETROTECHUK now on the 9th May 2021
chriswood1900 is offline   Reply With Quote
Reply

Thread Tools



All times are GMT +1. The time now is 2:49 pm.


All information and advice on this forum is subject to the WARNING AND DISCLAIMER located at https://www.vintage-radio.net/rules.html.
Failure to heed this warning may result in death or serious injury to yourself and/or others.


Powered by vBulletin®
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
Copyright ©2002 - 2020, Paul Stenning.