UK Vintage Radio Repair and Restoration Powered By Google Custom Search Vintage Radio and TV Service Data

Go Back   UK Vintage Radio Repair and Restoration Discussion Forum > Specific Vintage Equipment > Vintage Television and Video


Vintage Television and Video Vintage television and video equipment, programmes, VCRs etc.

Thread Tools
Old 17th May 2024, 1:38 pm   #1
German Dalek
German Dalek's Avatar
Join Date: Jan 2011
Location: Düsseldorf, Germany.
Posts: 388
Default WANTED: High Voltage Plug Connection

Hi all,

Since years I am on the run after a high voltage plug connection.
It has to be good for 17 kV at a b/w TV.

It has to be life-safe and the hot female part will be mounted on the back
of the cabinet.

It is for an italian "Diamond" mid 60s TV receiver with one chassis but two
cabinets and two CRTs and two speakers.

Maybe these kind of plugs were used on technical hospital equipment?

Thanks in advance,
German Dalek
And now something completly different:

MARC BOLAN, he was/is the real king of Pop Music!
German Dalek is offline   Reply With Quote
Old 17th May 2024, 8:06 pm   #2
Join Date: Jan 2004
Location: Newcastle upon Tyne, Tyne & Wear, UK.
Posts: 8,308
Default Re: WANTED: High Voltage Plug Connection

Hi, have a look at the AVO RM215 L/2 breakdown tester. This goes up to 14KV and has recessed plugs and sockets fitted.
They may be available or you may be able to replicate in a good quality plastic if you have the use of a lathe

Ed_Dinning is offline   Reply With Quote

Thread Tools

All times are GMT +1. The time now is 1:33 pm.

All information and advice on this forum is subject to the WARNING AND DISCLAIMER located at
Failure to heed this warning may result in death or serious injury to yourself and/or others.

Powered by vBulletin®
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Copyright ©2002 - 2024, Paul Stenning.