UK Vintage Radio Repair and Restoration Powered By Google Custom Search Vintage Radio Service Data

Go Back   UK Vintage Radio Repair and Restoration Discussion Forum > Other Discussions > Homebrew Equipment


Homebrew Equipment A place to show, design and discuss the weird and wonderful electronic creations from the hands of individual members.

Closed Thread
Thread Tools
Old 18th Dec 2018, 2:12 pm   #61
nigelr2000's Avatar
Join Date: Nov 2008
Location: North Walsham, Norfolk, UK.
Posts: 666
Default Re: FM to AM converter - variation on a theme!

"Have you connected a digital FM module to the modulator Nigel, or at this stage, just built and tested the modulator?"

Not an FM unit, just wired it too the headphone output on my bench CD deck and it worked very well with a range of about 3 feet with a length of about 2 ft of wire as an aerial. Also the 9 volt battery was down to around 7.2 volts giving me 5 ish after the resistor.
nigelr2000 is offline  
Closed Thread

Thread Tools

All times are GMT +1. The time now is 1:22 am.

All information and advice on this forum is subject to the WARNING AND DISCLAIMER located at
Failure to heed this warning may result in death or serious injury to yourself and/or others.

Powered by vBulletin®
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Copyright ©2002 - 2019, Paul Stenning.