|
Vintage Television and Video Vintage television and video equipment, programmes, VCRs etc. |
|
Thread Tools |
16th Apr 2011, 6:41 pm | #1 |
Retired Dormant Member
Join Date: Apr 2011
Location: Ermelo, Netherlands
Posts: 2
|
Knob for the Bush TV22
Dear,
Can you help me for a knob for the Bush TV22? See picture. Best regards, Lammert Bonenberg The Netherlands |
16th Apr 2011, 8:44 pm | #2 |
Dekatron
Join Date: Feb 2009
Location: Chesterfield, Derbyshire, UK.
Posts: 3,766
|
Re: Knob for the Bush TV22
Hi Lammert i presume the knob you require is like the one to the right of the one you have ringed if so i have one it' s yours for the cost of postage ,regards Mick.
|
17th Apr 2011, 7:46 am | #3 |
Dekatron
Join Date: Jun 2005
Location: Warnham, West Sussex. 10 miles south of DORKING.
Posts: 9,147
|
Re: Knob for the Bush TV22
The knob ringed is the tuning knob and is in place. Slightly confused here. I can take a picture of my TUG24 for you Lammert, [it has the same deck as the TV22] if that will help. It would be a shame for Mick to send you the control knob if it is not the part required. Regards, John.
|
17th Apr 2011, 7:59 am | #4 |
Octode
Join Date: Sep 2005
Location: Welshpool, Powys, Wales
Posts: 1,328
|
Re: Knob for the Bush TV22
ok well I dont think that picture is his as it clearly is in the UK (plug tops are 3 pin uk)
So could be any of the knobs... Andi
__________________
33, 45, 78, around and around they go...
|
17th Apr 2011, 8:07 am | #5 |
Dekatron
Join Date: Jun 2005
Location: Warnham, West Sussex. 10 miles south of DORKING.
Posts: 9,147
|
Re: Knob for the Bush TV22
Just slipped the I.F. deck from the TUG24A and taken a few pictures. J.
|
17th Apr 2011, 8:17 am | #6 |
Retired Dormant Member
Join Date: Nov 2009
Location: Weardale, UK.
Posts: 1,981
|
Re: Knob for the Bush TV22
The photo is taken from Panrocks restore from his website
|
17th Apr 2011, 8:26 am | #7 |
Hexode
Join Date: Jul 2004
Location: Rickmansworth, Hertfordshire, UK.
Posts: 341
|
Re: Knob for the Bush TV22
From memory, this knob also incorporates a thin piece of stiff wire with a tuning slug on the end of it.
__________________
Regards Ian McLaughlin, BVWS member |
17th Apr 2011, 2:04 pm | #8 |
Retired Dormant Member
Join Date: Apr 2011
Location: Ermelo, Netherlands
Posts: 2
|
Re: Knob for the Bush TV22
|
17th Apr 2011, 6:57 pm | #9 |
Dekatron
Join Date: Feb 2009
Location: Chesterfield, Derbyshire, UK.
Posts: 3,766
|
Re: Knob for the Bush TV22
Hi the one i have looks identical to the one on the right, not the one you have circled .
if you read the posts the one you have cicled is the correct one? more information is required ! |