UK Vintage Radio Repair and Restoration Powered By Google Custom Search Vintage Radio and TV Service Data

Go Back   UK Vintage Radio Repair and Restoration Discussion Forum > Specific Vintage Equipment > Vintage Amateur and Military Radio

Notices

Vintage Amateur and Military Radio Amateur/military receivers and transmitters, morse, and any other related vintage comms equipment.

Closed Thread
 
Thread Tools
Old 18th Sep 2020, 12:14 pm   #1
carlos10
Pentode
 
carlos10's Avatar
 
Join Date: Apr 2007
Location: Sint-eloois-winkel 8880, Belgium.
Posts: 168
Default Yaesu FT102

hi,
looking for the bypass wiring after removal relay rl01 on the pa board,
in order to get the screengrid current back
regards carlos on6cn
carlos10 is offline  
Old 23rd Sep 2020, 10:03 pm   #2
trh01uk
Octode
 
trh01uk's Avatar
 
Join Date: Nov 2010
Location: Ross-on-Wye, Herefordshire, UK.
Posts: 1,648
Default Re: Yaesu FT102

Carlos - I'm not really understanding your question. Chances are the manual will answer it though, and there is a copy here with schematics.

Richard
trh01uk is online now  
Old 24th Sep 2020, 8:43 pm   #3
carlos10
Pentode
 
carlos10's Avatar
 
Join Date: Apr 2007
Location: Sint-eloois-winkel 8880, Belgium.
Posts: 168
Default Re: Yaesu FT102

solved richard, the bypass was the orange withe wire that most be connected to pin 3 on the pcb were the relay was placed
carlos on6cn
carlos10 is offline  
Closed Thread

Thread Tools



All times are GMT +1. The time now is 12:23 pm.


All information and advice on this forum is subject to the WARNING AND DISCLAIMER located at https://www.vintage-radio.net/rules.html.
Failure to heed this warning may result in death or serious injury to yourself and/or others.


Powered by vBulletin®
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Copyright ©2002 - 2023, Paul Stenning.