|
Vintage Television and Video Vintage television and video equipment, programmes, VCRs etc. |
|
Thread Tools |
10th Feb 2019, 8:08 pm | #21 | |
Octode
Join Date: Jun 2018
Location: Essex, UK.
Posts: 1,307
|
Re: Freeview feeding signal to VCR issues.
Quote:
With the SCART, I understand that, I think there has just been some confusion in the way I first understood it, and the way I've written it. Thanks |
|
10th Feb 2019, 8:09 pm | #22 |
Octode
Join Date: Jun 2018
Location: Essex, UK.
Posts: 1,307
|
Re: Freeview feeding signal to VCR issues.
|
10th Feb 2019, 8:10 pm | #23 |
Octode
Join Date: Jun 2018
Location: Essex, UK.
Posts: 1,307
|
Re: Freeview feeding signal to VCR issues.
I've now read it, and it makes a lot more sense, I shall look into finding a remote that works.
Thanks |
10th Feb 2019, 9:54 pm | #24 |
Hexode
Join Date: Mar 2012
Location: Liverpool, Merseyside, UK.
Posts: 453
|
Re: Freeview feeding signal to VCR issues.
Why not look on your local Freecycle/Freegle (or post a Wanted ad) for another Freeview box?
These things were everywhere a few years ago, but are rarely needed these days as more people have ditched their old analogue sets. The other possibility is car boot sales. When I last went to one there were almost as many old Freeview boxes as Footspa's. Every box I've seen over the years needed the remote to access anything other than power and channel change. As mentioned, you will need to retune regularly. A lot of Freeview boxes were made by Vestel with various badges so there may be some interchange with remotes, though you'd need to "suck it and see". Again, car boot sales can be good places to find remote controls, often the sellers don't know what they're for and you can usually get them for a quid or less. |
10th Feb 2019, 10:35 pm | #25 |
Octode
Join Date: Jun 2018
Location: Essex, UK.
Posts: 1,307
|
Re: Freeview feeding signal to VCR issues.
Okay thank you.
I'll look now, I can look in my local charity shops, I know a few of them have some electronics, mainly CD players, but they might have others - I've never really looked properly I've messaged the previous owner to see if they still have the original remote for whatever reason, fingers crossed they do. My FV box is from Silvercrest, which I think is a Lidl's own. Thanks |
10th Feb 2019, 10:47 pm | #26 |
Dekatron
Join Date: Aug 2006
Location: Madrid, Spain / Wirral, UK
Posts: 7,498
|
Re: Freeview feeding signal to VCR issues.
Do yourself a favour, go for a Goodmans GDR11 freeview box off ebay, these have inbuilt modulators so no need to mess about with a video etc.
__________________
Regards, Ben. |
10th Feb 2019, 11:58 pm | #27 |
Octode
Join Date: Jun 2018
Location: Essex, UK.
Posts: 1,307
|
Re: Freeview feeding signal to VCR issues.
Thank you, I'll look into one as they seem fairly cheap, too.
Could definitely do without the hassle of interchanging a single SCART cable and coax in such a tight space to the appropriate sources and the VCR. Thanks |
11th Feb 2019, 12:42 am | #28 |
Hexode
Join Date: Oct 2012
Location: London, UK.
Posts: 498
|
Re: Freeview feeding signal to VCR issues.
It is Lidl's own. It is NOT a Freeview box. It is a generic DVB-T box. The remote is unique, so you need the correct one. The signal overload refers to a short (at DC) on the aerial input as the 5v aerial amplifier is turned on. You need the remote to turn it off.
|
11th Feb 2019, 3:19 pm | #29 | |
Dekatron
Join Date: May 2010
Location: Greater Manchester, UK.
Posts: 18,713
|
Re: Freeview feeding signal to VCR issues.
Quote:
Just why Lidl thought a generic digital terrestrial box was a good idea is anyone's guess, I can see the point of a generic D-Sat receiver as quite a lot of people watch services from Hotbird and Astra 19.2, and incidentally most of the staff and many of the customers at my local Lidl are Polish.
__________________
-- Graham. G3ZVT |
|
11th Feb 2019, 3:56 pm | #30 | |
Hexode
Join Date: Mar 2014
Location: Dublin, Ireland
Posts: 398
|
Re: Freeview feeding signal to VCR issues.
Quote:
|
|
11th Feb 2019, 7:47 pm | #31 |
Octode
Join Date: Jun 2018
Location: Essex, UK.
Posts: 1,307
|
Re: Freeview feeding signal to VCR issues.
So this wont receive proper FV?
I'll probably be sending it back and getting a refund and then buy a Goodmans GDR11, as Ben suggested - much better for me. I never realised that receivers etc weren't FV, and I'm not going to lie, I didn't really know they existed, I may have seen some, but I would've just assumed them to be FV. What do these receivers do if they're not FV? Thanks |
11th Feb 2019, 8:31 pm | #32 |
Dekatron
Join Date: Jan 2006
Location: Ramsbottom (Nr Bury) Lancs or Bexhill (Nr Hastings) Sussex.
Posts: 5,817
|
Re: Freeview feeding signal to VCR issues.
Graham and Kan Turk are saying that you bought a Generic Receiver that could be potentially ok for Freeview INH but is primarily designed to work in a number of different world situations. It is not as easy to operate as a dedicated Freeview domestic box that's only meant for the UK. Almost any actual FV box would have been better really. Would it be fair to say that you also seem to have a particular problem with processing some of the information given out here I wonder? Sometimes you seem to start from the end or the middle and work backwards, which then makes you more confused eg not having the right kit or actually absorbing the info in the first place. Is there any truth in this?
Dave Last edited by dave walsh; 11th Feb 2019 at 8:45 pm. |
11th Feb 2019, 8:39 pm | #33 |
Octode
Join Date: Jun 2018
Location: Essex, UK.
Posts: 1,307
|
Re: Freeview feeding signal to VCR issues.
Oh alright, I understand now. That makes sense considering it's a German brand, in a British market, with their own German market so it needs to work in both I suppose.
That's quite fair to say, to be honest, I do sometimes struggle with processing, it usually takes me a little while with a few re-reads to let it sink in - especially with the more technical stuff which I'm not used to - Sorry about that. Thanks |
11th Feb 2019, 9:14 pm | #34 |
Dekatron
Join Date: Jan 2006
Location: Ramsbottom (Nr Bury) Lancs or Bexhill (Nr Hastings) Sussex.
Posts: 5,817
|
Re: Freeview feeding signal to VCR issues.
No need to apologise INH but it may help more if you can find someone who could advise or mentor you on a one to one basis. Online communication has its drawbacks and being shown how to proceed in person can be much more successful than trying to describe things in print or even by video. There is a shortage of instruction venues nationally but [in London especially] you may be able to find one of these new volunteer repair workshops/hobby groups or a radio/electronics club that would be able to offer some direct help. Those Clubs are always looking for new members on a technical and social level.
In the past, many people would do this as the first step and receive a lot of help and encouragement. Combining that with the Forum may be a good way forward for you. At the moment you are restricted to just asking questions here which may not be so good in itself. I hope this helps. Dave |
11th Feb 2019, 9:18 pm | #35 |
Dekatron
Join Date: Nov 2003
Location: Heckmondwike, West Yorkshire, UK.
Posts: 9,642
|
Re: Freeview feeding signal to VCR issues.
No need to be sorry, no-one was born with this knowledge, or any other for that matter. Recognising the situation is most of the answer, it's those who don't who are lost causes!
|
11th Feb 2019, 9:37 pm | #36 |
Octode
Join Date: Jun 2018
Location: Essex, UK.
Posts: 1,307
|
Re: Freeview feeding signal to VCR issues.
I think that would help a lot to be honest, especially if working on a project, every little tiny detail can be seen one to one than online. I agree completely about the drawbacks with online use.
Though I have learnt a lot from this forum from record players to TVs. (I know I'm no where near experienced and knowledgeable on TVs as many members on here, but I am a lot more than I was three months ago!) Finding a club or something might be a bit tricky getting to though, as I'm not actually in London, but relatively close by, so I thought it'd be best for London as it's better known. That doesn't mean I won't look though! I'd definitely be interested in something like that. AC/HL - I think sometimes what causes confusion is the difference between the knowledge between me (and I'm sure others too) and those experienced on this forum, it's a large gap in between and so some confusion is bound to occur. Once I get to know terms etc, I find it much easier. I usually get what's meant, somehow, even if it isn't exact Thanks |
12th Feb 2019, 1:31 am | #37 |
Dekatron
Join Date: Jan 2006
Location: Ramsbottom (Nr Bury) Lancs or Bexhill (Nr Hastings) Sussex.
Posts: 5,817
|
Re: Freeview feeding signal to VCR issues.
Your response is very encouraging INH but not actually being in London sort of makes my point re misinformation that only emerges slowly and confusingly. You can at least ID your local Amateur Radio Society for us [I'm sure there will be one] without revealing any personal information. Someone on here might also be a local Radio Society member and they may respond or not.
Nothing to lose either way but lots to gain I think! It's about having confidence but people who are not so genuine as you [or really don't listen] usually don't attract Forum support in this way! Dave |
12th Feb 2019, 2:39 am | #38 |
Octode
Join Date: Jun 2018
Location: Essex, UK.
Posts: 1,307
|
Re: Freeview feeding signal to VCR issues.
Sorry about that, i thought putting London would be easier for the general location as London is the nearest known place. I’m in Essex, so Essex ham is my local which offers training. I think there was one in my town but it looks to have unfortunately shut down - I’ll look into both and go from there!
As you say, nothing to lose. And i do really geniunely enjoy the older tech and such (I love the whole retro/vintage era, generally) I have to thank the people on this forum as i wouldn’t know nearly as much as i do now. I’ve learnt so much in the few months i’ve been on this forum. Thanks |
12th Feb 2019, 2:47 am | #39 |
Dekatron
Join Date: Jan 2006
Location: Ramsbottom (Nr Bury) Lancs or Bexhill (Nr Hastings) Sussex.
Posts: 5,817
|
Re: Freeview feeding signal to VCR issues.
OK let us know how you get on! If you look at the recent Aspect Ratio thread it's evident that there was something there that I really didn't grasp! As Bill said it's all about being aware!
Dave |
12th Feb 2019, 9:44 am | #40 |
Octode
Join Date: Jun 2018
Location: Essex, UK.
Posts: 1,307
|
Re: Freeview feeding signal to VCR issues.
I will do!
Thats true, i suppose you have to be aware for you to realise whats being spoken about, if you arent aware, then you wont have a clue. The level of awareness = the level of understanding. Thanks |