|
Vintage Radio (domestic) Domestic vintage radio (wireless) receivers only. |
|
Thread Tools |
27th Dec 2019, 2:31 pm | #41 |
Triode
Join Date: Sep 2019
Location: Chelmsford, Essex, UK.
Posts: 30
|
Re: Bush AC11 - Newbie Project
Also:
dismantled the tone control pot and cleaned it up. Loundspeaker removed and cleaned (before and after photos attached) Loudspeaker grille straightened (before and after photos attached) |
27th Dec 2019, 2:32 pm | #42 |
Triode
Join Date: Sep 2019
Location: Chelmsford, Essex, UK.
Posts: 30
|
Re: Bush AC11 - Newbie Project
and ... Dial lamp reflector cleaned up
Glasss looks ins good shape to me Last edited by RetroGuy527; 27th Dec 2019 at 2:38 pm. |
1st Apr 2020, 3:38 pm | #43 |
Triode
Join Date: Sep 2019
Location: Chelmsford, Essex, UK.
Posts: 30
|
Re: Bush AC11 - Newbie Project
Thought I'd have a go at the lettering as I'm a home slightly more than usual! I used some model making acrylic paint, left to dry properly and then cleaned off excess with "0000 Ultra Fine Grade Steel Wire Wool" which did the job nicely. Result shown in attached photo. Hope you like.
|
10th Apr 2020, 10:40 am | #44 |
Triode
Join Date: Sep 2019
Location: Chelmsford, Essex, UK.
Posts: 30
|
Re: Bush AC11 - Newbie Project
Finished the rest of the knobs today - really pleased with the results
|
10th Apr 2020, 6:15 pm | #45 |
Nonode
Join Date: Nov 2016
Location: Aberaeron, Ceredigion, Wales, UK.
Posts: 2,869
|
Re: Bush AC11 - Newbie Project
Yes they have come up nice, well done.
John |