|
Vintage Amateur and Military Radio Amateur/military receivers and transmitters, morse, and any other related vintage comms equipment. |
|
Thread Tools |
13th Jan 2008, 12:57 pm | #1 |
Retired Dormant Member
Join Date: Jun 2005
Location: Maesteg, Bridgend County Borough, Wales.
Posts: 26
|
Trio Ts520 pa coil switch burn up
Hello, my cousin dropped his TS520 off for me to fix this morning, he tuned it up with no load. The pa coil switch has arced over and carbonised. Luckily is a completely seperate switch joined on to the band switch shaft by a coupler. I have taken a photograph of this and I also have a pdf file of the enlarged diagram of the pa switch. Does anyone think they could help me with a switch, I see that I can not load up the photograph as it s too large. I can however e mail it direct to someone who could possibly help
73's roger luke |
14th Jan 2008, 11:07 am | #2 |
Retired Dormant Member
Join Date: Oct 2006
Location: Nottingham
Posts: 35
|
Re: Trio Ts520 pa coil switch burn up
Ring Lowe Electronics in Matlock - they have stock of that sort of thing.
01629 832374. |
15th Jan 2008, 6:38 pm | #3 |
Retired Dormant Member
Join Date: Jun 2005
Location: Maesteg, Bridgend County Borough, Wales.
Posts: 26
|
Re: Trio Ts520 pa coil switch burn up
thanks for that idea, i assumed, perhaps wrongly that all these parts were long gone. I will give them a try tomorrow, or e mail them tonight.
Rog GW3XJC |
23rd Jan 2008, 6:20 pm | #4 |
Retired Dormant Member
Join Date: Jun 2005
Location: Maesteg, Bridgend County Borough, Wales.
Posts: 26
|
Re: Trio Ts520 pa coil switch burn up
Thanks to Lowe electronics and Valleyjinker I have installed the new switch and the set is now a runner.
Roger GW3XJC |