UK Vintage Radio Repair and Restoration Powered By Google Custom Search Vintage Radio and TV Service Data

Go Back   UK Vintage Radio Repair and Restoration Discussion Forum > Specific Vintage Equipment > Vintage Test Gear and Workshop Equipment

Notices

Vintage Test Gear and Workshop Equipment For discussions about vintage test gear and workshop equipment such as coil winders.

Closed Thread
 
Thread Tools
Old 20th Jun 2019, 1:55 pm   #1
Wendymott
Octode
 
Wendymott's Avatar
 
Join Date: Jun 2013
Location: Huddersfield, West Yorkshire, UK.
Posts: 1,795
Default Anritsu MG3642A Generator

Hi Peeps... Just bought the above from Ebay. Unfortunately I was unaware of the front to back depth, and its weight. I was hoping it was going to "slot" in where my two Marconi 2022's resided... at 18Kg's a bit heavy.
Functionality is brilliant, but it is going to take some serious re-jigging of the shelf to ensure it stays up there.
Buyer beware I guess. But the 2022's are going.
__________________
Should get out more.

Regards
Wendy G8BZY

Last edited by AC/HL; 20th Jun 2019 at 7:27 pm. Reason: Title
Wendymott is offline  
Closed Thread




All times are GMT +1. The time now is 9:38 pm.


All information and advice on this forum is subject to the WARNING AND DISCLAIMER located at https://www.vintage-radio.net/rules.html.
Failure to heed this warning may result in death or serious injury to yourself and/or others.


Powered by vBulletin®
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Copyright ©2002 - 2023, Paul Stenning.