3D Printing PTV/Philips PM566x / PT5664 Vectorscope / WFM "CRT Windows" - UK Vintage Radio Repair and Restoration Discussion Forum

inaxeon · 14th Jan 2025, 1:36 pm

Hey folks

For whatever reason these instruments are frequently seen with the plastic CRT window busted off. So I decided to have a stab at re-designing the original part (4008 108 04020). Worked out pretty well. This one is measured up from an original part and is nearly an identical copy.

3D Model (STL): https://xpander.mattmillman.com/files/linked/window.stl
Larger image: https://xpander.mattmillman.com/files/linked/crt_window.jpg

Note that this does not fit the PM556x series. Though they look similar the're attached to instrument using a slightly different arrangement.

14th Jan 2025, 1:36 pm	#1
inaxeon Pentode Join Date: May 2022 Location: Odiham, Hampshire, UK. Posts: 165	3D Printing PTV/Philips PM566x / PT5664 Vectorscope / WFM "CRT Windows" Hey folks For whatever reason these instruments are frequently seen with the plastic CRT window busted off. So I decided to have a stab at re-designing the original part (4008 108 04020). Worked out pretty well. This one is measured up from an original part and is nearly an identical copy. 3D Model (STL): https://xpander.mattmillman.com/files/linked/window.stl Larger image: https://xpander.mattmillman.com/files/linked/crt_window.jpg Note that this does not fit the PM556x series. Though they look similar the're attached to instrument using a slightly different arrangement. Attached Thumbnails