|
Vintage Amateur and Military Radio Amateur/military receivers and transmitters, morse, and any other related vintage comms equipment. |
|
Thread Tools |
21st Oct 2008, 11:08 pm | #1 |
Retired Dormant Member
Join Date: Oct 2008
Location: Crawley
Posts: 1
|
Rediffusion R500 Receiver
Hi,
Was wondering if anyone has any information on the Rediffusion R500 Receiver. I am after the configuration of the power supply toroidal which I believe is marked up SR/T 2770. Basically I need to know what the different cables on the transformer are i.e. primary winding, secondary winding. The colours are as follows :- White, Orange, Red, Brown, Black White, Orange, Red, Brown, Black (sleeved with a white sleeve on each cable) I think this is the primary winding with multitaps upto 110/115V on each group, therefore joining together will give primary input 230/240V 2 Thick Blue, 2 Pink, 2 Purple, 2 Yellow, 1 Green, 1 Grey - I think these are various secondaries, some are connected together as the same windings; I can't remember which though and I have no multimeter handy as I type. If anyone has a service manual and is able to give the various winding identities and voltage tappings, it would be very helpful. Thanks in advance Bob |
21st Oct 2008, 11:16 pm | #2 |
Moderator
Join Date: Jan 2003
Location: Ipswich, Suffolk, IP4, UK.
Posts: 21,289
|
Re: Rediffusion R500 Receiver
__________________
Graham. Forum Moderator Reach for your meter before you reach for your soldering iron. |