Mini clear-out including Bulgin connectors - UK Vintage Radio Repair and Restoration Discussion Forum

GroovyG · 21st Jun 2022, 8:58 am

1) 3 x Hour counters - DIN rail mounting, not re-settable, presume DC operation from '+' label
2) Video camera mounted in case. No idea, no data, but presume superseded and still working.
All FOC but for postage.

GroovyG · 23rd Jun 2022, 8:38 pm

Here's some more:
1) just for the collecters amongst you, 5A plugs, 2 by Eveready, one WG (the embossed lines on the cover don't show in the pic), one MK along with matching socket
2) a rather odd device, a B15 (SBC) lampholder at one end, a pair of sprung pins at the other, overall length 71mm.

All FOC but for postage.

GroovyG · 23rd Jun 2022, 8:52 pm

And for the die-hard collecter:
1) a ceiling pull switch by Crabtree, 250V 15A DP
2) a 3 pole Twist-Lock connector, made in USA by Hubbell, rated 250V 10A, 125V 15A.
3) a wood cased push button switch, would grace any museum

Again FOC but for postage.

GroovyG · 23rd Jun 2022, 9:22 pm

And finally:
1) Semiconductor Strain Gauge Sensor, type TS1 by Ether Engineering Ltd of Hemel Hempstead. Comes in its own instrument case, with 2 yards of flexible cable and original Test Certificate dated 18-9-70. Range 0 - 200 grammes, Appears unused.
2) Terminal block 4w - the camera show every speck of dust on this one.

FOC bar postage.

3) Collection of Bulgin connectors. The largest one (on the left), with 2½m of 1.5 flex, is 22mm diam and is the type with screw terminals. I'll match Norman's £15 incl postage for this one. The remainder to go as one lot, perhaps £15 incl postage is reasonable?

high_vacuum_house · 23rd Jun 2022, 9:39 pm

Good evening,
Could I show an interest in the hour meters and the strain gauge please. They would need posting though.
Many thanks,
Christopher Capener

radiograham · 24th Jun 2022, 12:38 am

Quote:

Originally Posted by GroovyG

1) 3 x Hour counters - DIN rail mounting, not re-settable, presume DC operation from '+' label
2) Video camera mounted in case. No idea, no data, but presume superseded and still working.
All FOC but for postage.

Hi,can i ask for item 2 the video camera. Graham.

saxmaniac · 24th Jun 2022, 4:47 am

Hi, I have a use for the crabtree pull switch as I have similar ones in my house and one's faulty! I hope you don't mind posting but I'll stand aside if anyone else wants it as part of a job lot

vinylspinner · 24th Jun 2022, 6:20 am

Good morning Graham,

PM sent.

Regards

Nigel

GroovyG · 24th Jun 2022, 9:51 am

By all means, Christopher - please PM me with your address.
Regards,
Graham

Quote:

Originally Posted by high_vacuum_house

Good evening,
Could I show an interest in the hour meters and the strain gauge please. They would need posting though.
Many thanks,
Christopher Capener

GroovyG · 24th Jun 2022, 9:53 am

Consider it yours, Graham. Please PM me with your address.
Regards,
Graham

Quote:

Originally Posted by radiograham

Quote:

Originally Posted by GroovyG

1) 3 x Hour counters - DIN rail mounting, not re-settable, presume DC operation from '+' label
2) Video camera mounted in case. No idea, no data, but presume superseded and still working.
All FOC but for postage.

Hi,can i ask for item 2 the video camera. Graham.

GroovyG · 24th Jun 2022, 9:55 am

Delighted that it will be put to good use. Please PM me with you address.
Regards,
Graham

Quote:

Originally Posted by saxmaniac

Hi, I have a use for the crabtree pull switch as I have similar ones in my house and one's faulty! I hope you don't mind posting but I'll stand aside if anyone else wants it as part of a job lot

GroovyG · 24th Jun 2022, 10:26 pm

Price reduced - Post #4, item 3, 22mm Bulgin connector now £8.50 posted,
Remaining Bulgins £12 posted.
(Misread detail in Norman's post - oops)
Repeating photos for clarity.

Stellar · 24th Jun 2022, 10:40 pm

Hi Graham
I'll take the 22mm bulging plug for £8:50 posted
Cheers
Simon

60 oldjohn · 25th Jun 2022, 4:32 am

I would like no3 please, the wooden switch for my museum, should go well with the wooden plugs. will be in contact later today.

John.

GroovyG · 6th Jul 2022, 2:58 pm

Still available:
1) 5A plugs & socket
2) Odd B15 lampholder
3) 3 pole Twist-lock connector
4) Bulgin connectors (new photo - largest one claimed)
5) 4-w terminal block

GroovyG · 6th Jul 2022, 3:12 pm

Here's another item I'm never likely to use: a Gemini Data Logger, presumably of temperature by Tinytalk, part no.TK-0014. Presumed working but don't have the knowledge to test. Range -40 > +85 C.

duncanlowe · 6th Jul 2022, 3:20 pm

Quote:

Originally Posted by GroovyG

Here's another item I'm never likely to use: a Gemini Data Logger, presumably of temperature by Tinytalk, part no.TK-0014. Presumed working but don't have the knowledge to test. Range -40 > +85 C.

Do you have the USB cable that goes with this? I'd be interested if yes.

EDIT: sorry I realise now the required software is licensed, so not something I'd use.

GroovyG · 6th Jul 2022, 4:17 pm

Oops - re the data logger, omitted the "FOC" plus postage.
I did enquire of the supplier a while ago, the response being that proprietary software and USB cable would be required, the quoted price from them being £55 + VAT & carriage. I have neither software nor cable.
They did also send me the datasheet which I'll be glad to forward to anyone here.

21st Jun 2022, 8:58 am	#1
GroovyG Pentode Join Date: Nov 2015 Location: Witney, Oxfordshire, UK. Posts: 167	Mini clear-out including Bulgin connectors 1) 3 x Hour counters - DIN rail mounting, not re-settable, presume DC operation from '+' label 2) Video camera mounted in case. No idea, no data, but presume superseded and still working. All FOC but for postage. Attached Thumbnails Last edited by Cobaltblue; 24th Jun 2022 at 5:45 pm. Reason: added to title

23rd Jun 2022, 8:38 pm	#2
GroovyG Pentode Join Date: Nov 2015 Location: Witney, Oxfordshire, UK. Posts: 167	Re: Mini clear-out Here's some more: 1) just for the collecters amongst you, 5A plugs, 2 by Eveready, one WG (the embossed lines on the cover don't show in the pic), one MK along with matching socket 2) a rather odd device, a B15 (SBC) lampholder at one end, a pair of sprung pins at the other, overall length 71mm. All FOC but for postage. Attached Thumbnails

23rd Jun 2022, 8:52 pm	#3
GroovyG Pentode Join Date: Nov 2015 Location: Witney, Oxfordshire, UK. Posts: 167	Re: Mini clear-out And for the die-hard collecter: 1) a ceiling pull switch by Crabtree, 250V 15A DP 2) a 3 pole Twist-Lock connector, made in USA by Hubbell, rated 250V 10A, 125V 15A. 3) a wood cased push button switch, would grace any museum Again FOC but for postage. Attached Thumbnails

23rd Jun 2022, 9:39 pm	#5
high_vacuum_house Octode Join Date: May 2003 Location: Belper Derbyshire Posts: 1,595	Re: Mini clear-out Good evening, Could I show an interest in the hour meters and the strain gauge please. They would need posting though. Many thanks, Christopher Capener __________________ A proper radio is one that needs to be moved with a wheelbarrow !!

24th Jun 2022, 4:47 am	#7
saxmaniac Heptode Join Date: Oct 2007 Location: Birmingham, West Midlands, UK. Posts: 581	Re: Mini clear-out Hi, I have a use for the crabtree pull switch as I have similar ones in my house and one's faulty! I hope you don't mind posting but I'll stand aside if anyone else wants it as part of a job lot

23rd Jun 2022, 9:22 pm	#4
GroovyG Pentode Join Date: Nov 2015 Location: Witney, Oxfordshire, UK. Posts: 167	Re: Mini clear-out And finally: 1) Semiconductor Strain Gauge Sensor, type TS1 by Ether Engineering Ltd of Hemel Hempstead. Comes in its own instrument case, with 2 yards of flexible cable and original Test Certificate dated 18-9-70. Range 0 - 200 grammes, Appears unused. 2) Terminal block 4w - the camera show every speck of dust on this one. FOC bar postage. 3) Collection of Bulgin connectors. The largest one (on the left), with 2½m of 1.5 flex, is 22mm diam and is the type with screw terminals. I'll match Norman's £15 incl postage for this one. The remainder to go as one lot, perhaps £15 incl postage is reasonable? Attached Thumbnails

24th Jun 2022, 6:20 am	#8
vinylspinner Hexode Join Date: Mar 2014 Location: Sells Green, Wiltshire, UK. Posts: 250	Re: Mini clear-out Good morning Graham, PM sent. Regards Nigel

24th Jun 2022, 10:26 pm	#12
GroovyG Pentode Join Date: Nov 2015 Location: Witney, Oxfordshire, UK. Posts: 167	Re: Mini clear-out including Bulgin connectors Price reduced - Post #4, item 3, 22mm Bulgin connector now £8.50 posted, Remaining Bulgins £12 posted. (Misread detail in Norman's post - oops) Repeating photos for clarity. Attached Thumbnails

24th Jun 2022, 10:40 pm	#13
Stellar Pentode Join Date: Feb 2016 Location: Audlem, Cheshire East, UK. Posts: 143	Re: Mini clear-out including Bulgin connectors Hi Graham I'll take the 22mm bulging plug for £8:50 posted Cheers Simon

25th Jun 2022, 4:32 am	#14
60 oldjohn Dekatron Join Date: Dec 2004 Location: East Yorkshire, UK. Posts: 3,351	Re: Mini clear-out including Bulgin connectors I would like no3 please, the wooden switch for my museum, should go well with the wooden plugs. will be in contact later today. John. __________________ My favourite text message "I'll be there in five minutes, if not read again"

6th Jul 2022, 2:58 pm	#15
GroovyG Pentode Join Date: Nov 2015 Location: Witney, Oxfordshire, UK. Posts: 167	Re: Mini clear-out including Bulgin connectors Still available: 1) 5A plugs & socket 2) Odd B15 lampholder 3) 3 pole Twist-lock connector 4) Bulgin connectors (new photo - largest one claimed) 5) 4-w terminal block Attached Thumbnails

6th Jul 2022, 3:12 pm	#16
GroovyG Pentode Join Date: Nov 2015 Location: Witney, Oxfordshire, UK. Posts: 167	Re: Mini clear-out including Bulgin connectors Here's another item I'm never likely to use: a Gemini Data Logger, presumably of temperature by Tinytalk, part no.TK-0014. Presumed working but don't have the knowledge to test. Range -40 > +85 C. Attached Thumbnails

6th Jul 2022, 4:17 pm	#18
GroovyG Pentode Join Date: Nov 2015 Location: Witney, Oxfordshire, UK. Posts: 167	Re: Mini clear-out including Bulgin connectors Oops - re the data logger, omitted the "FOC" plus postage. I did enquire of the supplier a while ago, the response being that proprietary software and USB cable would be required, the quoted price from them being £55 + VAT & carriage. I have neither software nor cable. They did also send me the datasheet which I'll be glad to forward to anyone here.