|
Other Vintage Household Electrical or Electromechanical Items For discussions about other vintage (over 25 years old) electrical and electromechanical household items. See the sticky thread for details. |
|
Thread Tools |
29th Jul 2020, 11:09 pm | #1 |
Pentode
Join Date: May 2010
Location: Sandviken, Sweden
Posts: 233
|
Gooey rubber - not just belts
A sidetrack from sticky belts:
My old (1960-70) extractor hood had started to become noisy, especially during spin-up. It was obvious that the fan was lightly rubbing the housing. I took it apart and found that the motor was mounted with rubber bushings that had turned to a very sticky tar-like mess I have heard of this happening with belts in tape recorders but never seen it myself until now. I was able to scrape the goo off the motor fixtures and clean them with methylated spirits. The hood was assembled again but with steel washers instead of the rubber bushings. I suppose it should in theory be a bit noisier with steel instead of rubber but I can't say I notice any difference. At least the fan don't scrape it's housing anymore. The motor is earthed through a wire so the loss of electric insulation should not be of concern. |
30th Jul 2020, 4:31 am | #2 |
Moderator
Join Date: Mar 2012
Location: Fife, Scotland, UK.
Posts: 22,866
|
Re: Gooey rubber - not just belts
Looks like a reaction with the fat droplets in the air it's pumping.
David
__________________
Can't afford the volcanic island yet, but the plans for my monorail and the goons' uniforms are done |
30th Jul 2020, 6:51 am | #3 |
Octode
Join Date: Oct 2008
Location: Littlehampton, West Sussex, UK.
Posts: 1,465
|
Re: Gooey rubber - not just belts
The rubber feet on my Yamaha piano keyboard turned into goo and before I realised I got some on the cream carpet. Took a lot of effort to clean it away.
Jim |
30th Jul 2020, 6:53 am | #4 |
Octode
Join Date: Dec 2017
Location: Morden, Surrey, UK.
Posts: 1,557
|
Re: Gooey rubber - not just belts
A lot of old rubber will go this way, even without the aid of a warm humid atmosphere and fatty droplets.
|
30th Jul 2020, 9:17 am | #5 |
Dekatron
Join Date: Jan 2012
Location: Brentwood, Essex, UK.
Posts: 5,337
|
Re: Gooey rubber - not just belts
Some cameras and binoculars, including very expensive ones, where this has been used to provide increased grip, have had the same problem. It just degrades over time, regardless of the environment.
|
30th Jul 2020, 9:56 am | #6 |
Heptode
Join Date: Feb 2011
Location: Southend, Essex, UK.
Posts: 802
|
Re: Gooey rubber - not just belts
Must admit these 'tactile surfaces' put me off!
Had a mouse recently part covered in a tactile rubber skin, was so sticky and decomposed I almost threw it away. I did eventually get it all off so it's now back as a 'spare' Alan |
30th Jul 2020, 10:01 am | #7 |
Moderator
Join Date: Mar 2012
Location: Fife, Scotland, UK.
Posts: 22,866
|
Re: Gooey rubber - not just belts
Be VERY careful what you handle before touching rubber things.
Otex eardrops in my case. With your head on one side while the stuff pops and fizzes inside your ear, you want a diversion. So I watched some TV. A tiny trace of the stuff on my fingers got onto the silicone flubber keyboard of the remote. Within a couple of days the silicone rubber had swelled to the point where the keys I'd touched (the most usual ones) could not be moved in their holes in the plastic case. End of that remote! Those ear drops work amazingly well, but can give you a surprise with their sound-effects. I did some tests, even a trace ruins the tactile surfaces moulded onto many things. I always wash my hands before touching the Nikons. David
__________________
Can't afford the volcanic island yet, but the plans for my monorail and the goons' uniforms are done |
30th Jul 2020, 11:00 am | #8 |
Dekatron
Join Date: Apr 2012
Location: Worksop, Nottinghamshire, UK.
Posts: 5,553
|
Re: Gooey rubber - not just belts
They certainly did go through a period of making things out of Phillips tape recorder belt rubber.
Cable grommets also do the same thing. I have also had a computer mouse fall victim to the goo plague. I have not yet found a multi meter protector that has fallen victim. |
30th Jul 2020, 11:34 am | #9 |
Dekatron
Join Date: Apr 2019
Location: Worthing, West Sussex, UK.
Posts: 6,600
|
Re: Gooey rubber - not just belts
I recently had the same problem on an old Yamaha keyboard that I had got down from the loft, the rubber feet were a right mess.
David |
31st Jul 2020, 11:06 am | #10 |
Octode
Join Date: Dec 2019
Location: Owston Ferry, North Lincolnshire, UK.
Posts: 1,701
|
Re: Gooey rubber - not just belts
Same problem on the battery contact insulator in a Bush TR82/C, thats a first for me!
|
31st Jul 2020, 3:31 pm | #11 |
Hexode
Join Date: Oct 2007
Location: Ossett, West Yorkshire, UK.
Posts: 406
|
Re: Gooey rubber - not just belts
Same problem for me with the rubber grommets supporting the variable capacitor in my 1950s Cossor Melody Maker.
David |
31st Jul 2020, 8:51 pm | #12 |
Heptode
Join Date: Jul 2016
Location: Portland, Dorset, UK.
Posts: 874
|
Re: Gooey rubber - not just belts
Strangley I have a Generalmusic/GEM S2 Keyboard with a sort of rubberised finish all over and it's not gone sticky at all, and that was made in 1992.
|
1st Aug 2020, 3:37 am | #13 |
Heptode
Join Date: Sep 2009
Location: Kinver, Staffordshire, UK.
Posts: 634
|
Re: Gooey rubber - not just belts
I`ve got an umbrella with a rubber hand grip and this has garn all sticky.
Can something be put on rubber to stabilise it when this starts to happens ? Robin |
1st Aug 2020, 12:27 pm | #14 |
Dekatron
Join Date: Apr 2012
Location: Worksop, Nottinghamshire, UK.
Posts: 5,553
|
Re: Gooey rubber - not just belts
|
1st Aug 2020, 1:49 pm | #15 |
Heptode
Join Date: Sep 2009
Location: Tonbridge, Kent, UK.
Posts: 686
|
Re: Gooey rubber - not just belts
Robin, try talcum powder. Works well on my binoculars, you may need to do it every couple of months.
|