UK Vintage Radio Repair and Restoration Powered By Google Custom Search Vintage Radio and TV Service Data

Go Back   UK Vintage Radio Repair and Restoration Discussion Forum > Offered and Wanted Messages > Sets, Parts and Service Information Offered (private sellers only, exact price required, no swaps)

Notices

Sets, Parts and Service Information Offered (private sellers only, exact price required, no swaps) You may announce components or sets for sale or offered free here. Private collectors only - no traders. You must include an exact price. No swaps.

Closed Thread
 
Thread Tools
Old 3rd May 2021, 4:40 pm   #1
robinshack
Octode
 
robinshack's Avatar
 
Join Date: Jun 2010
Location: Spalding, Peterborough, Cambridgeshire, UK.
Posts: 1,558
Default Assorted tools, crimp, nut drivers, hole punches, spanners & other bits

After a recent new thread about tools advice, I dug out a box that was earmarked for disposal just before xmas.
OK, this is the some of items that will fit inside a "small parcel" by posting standards.
A few other miscellaneous items will be added in the next couple of days.

NO HAT.
Please reply by this thread, not PM if item(s) is definitely wanted. It will be considered sold immediately and reserved for you.
Then, after I have added the few more other items to this thread, you can also look and then reply to any additional item you may want via this same thread.
This is so I can save you postage cost (and me packing) by sending up to 2kg maximum parcel weight, rather than as separate parcels.

Postage up to 2kg max second class is 3.50 if total value is less than 25. 25 to 50 (2kg max) will be an additional 1 for signed for. This includes cost of packaging materials that I have to buy. I like to pack items properly.
Weights of each item are given so as you can ensure total is less than 2kg. If you want items that together are more than 2kg, another parcel is needed.

Allow 130g for packaging materials
Cheque, PO or bank transfer. No paypal. Please wait for my PM with the total and also my payment details. Don't forget to send your name and address as well!
Posting will be early next week hopefully, as I do not go out very often and it also gives time for other members to see this.

Pic 1 A box of 40 din rail neutral blocks. 560g 4

Pic 2 (a) A blue ELCO pin inserter / extracter. For the flat type gold plated pin as used on Pye Westminster remote control box connectors. 50g 2
(b) A co-axial crimp tool. Not sure of size, but certainly very small, like .sma, smc? 380g 4
(c) An RJ ** ?? crimp tool. 480g 3

Pic 3 (a) 3 solder suckers, plus spares for the 2 green ones are in bag. 200g All nozzles are used condition. 2
(b) 6 Nut driver 0, 2, 4, 6, 8BA & 8mm, 5.5mm (this is also marked 7/32 5BA) 450g 5

Pic 4 (a) Torque wrench, preset adjustable. Has the standard hex socket approx 1/4". It is marked 3oz f in - 12lb f in and 260gm f cm - 14kg f cm Weight is 180g 5
(b) 7x metric spanners 185g 2.50

Pic 5 shows 12 assorted punches. Assume all the boxed have been used. Only the one (8) has an allen key. All look good to reasonable condition.
(1) 5/8 " boxed 65g 2.50
(2) 5/8 " boxed 65g 2.50
(3) 3/4" 121g 3
(4) 1" boxed 135g 3.50
(5) 1 1/8" boxed 172g 4
(6) 36 x 20mm (measured with ruler, not micro) rectangular 660g 5
(7) 1 1/8" 200g 4
(8) 1" + 1 1/8" DUAL SIZE + Allen key 330g 5
(9) 1 1/4" + 1 1/2" DUAL SIZE 370g 5
(10) 25mm boxed 140g 4
(11) 16.5mm RS 53g 2
(12) 16.5mm RS 50g 2

Rob
Attached Thumbnails
Click image for larger version

Name:	DSCF0001.jpg
Views:	213
Size:	90.4 KB
ID:	233165   Click image for larger version

Name:	DSCF0004.jpg
Views:	239
Size:	101.6 KB
ID:	233166   Click image for larger version

Name:	DSCF0005.jpg
Views:	241
Size:	116.6 KB
ID:	233167   Click image for larger version

Name:	DSCF0006.jpg
Views:	226
Size:	117.4 KB
ID:	233168   Click image for larger version

Name:	DSCF0008.jpg
Views:	244
Size:	95.6 KB
ID:	233169  

__________________
I am also interested in and collect 00 model railway. My avatar is Bruiser, he has cauliflower ears!
robinshack is offline  
Old 3rd May 2021, 4:45 pm   #2
WaveyDipole
Nonode
 
WaveyDipole's Avatar
 
Join Date: Mar 2013
Location: Leicester, UK
Posts: 2,031
Default Re: Assorted tools, crimp, nut drivers, hole punches, spanners & other bits

I would like the two crimp tools in photo 2 please.
WaveyDipole is offline  
Old 3rd May 2021, 4:51 pm   #3
robinshack
Octode
 
robinshack's Avatar
 
Join Date: Jun 2010
Location: Spalding, Peterborough, Cambridgeshire, UK.
Posts: 1,558
Default Re: Assorted tools, crimp, nut drivers, hole punches, spanners & other bits

OK Wavey Dipole, yours . I will contact again in a few days, in case any of my to-be- offered items tempt you!
Thanks, Rob
__________________
I am also interested in and collect 00 model railway. My avatar is Bruiser, he has cauliflower ears!
robinshack is offline  
Old 3rd May 2021, 4:55 pm   #4
mervyn
Pentode
 
Join Date: Mar 2005
Location: Whitfield, Dover, Kent, UK.
Posts: 110
Default Re: Assorted tools, crimp, nut drivers, hole punches, spanners & other bits

i would like the torque wrench please
regards
Merv
mervyn is offline  
Old 3rd May 2021, 4:58 pm   #5
robinshack
Octode
 
robinshack's Avatar
 
Join Date: Jun 2010
Location: Spalding, Peterborough, Cambridgeshire, UK.
Posts: 1,558
Default Re: Assorted tools, crimp, nut drivers, hole punches, spanners & other bits

OK mervyn, yours. I will contact again in a few days, in case any of my to-be- offered items tempt you!
Rob
__________________
I am also interested in and collect 00 model railway. My avatar is Bruiser, he has cauliflower ears!
robinshack is offline  
Old 3rd May 2021, 5:01 pm   #6
mervyn
Pentode
 
Join Date: Mar 2005
Location: Whitfield, Dover, Kent, UK.
Posts: 110
Default Re: Assorted tools, crimp, nut drivers, hole punches, spanners & other bits

saying that would also like the nut drivers as well

regards
Merv
mervyn is offline  
Old 3rd May 2021, 5:03 pm   #7
robinshack
Octode
 
robinshack's Avatar
 
Join Date: Jun 2010
Location: Spalding, Peterborough, Cambridgeshire, UK.
Posts: 1,558
Default Re: Assorted tools, crimp, nut drivers, hole punches, spanners & other bits

OK mervyn, nut drivers yours as well. I will contact again in a few days, in case any of my to-be- offered items tempt you!
Rob
__________________
I am also interested in and collect 00 model railway. My avatar is Bruiser, he has cauliflower ears!
robinshack is offline  
Old 3rd May 2021, 5:03 pm   #8
Steve_Bell
Hexode
 
Join Date: Sep 2004
Location: Newcastle upon Tyne, Tyne & Wear, UK.
Posts: 367
Default Re: Assorted tools, crimp, nut drivers, hole punches, spanners & other bits

I would like the punches (3), (6), (7) & (9), please.

Steve.
Steve_Bell is offline  
Old 3rd May 2021, 5:12 pm   #9
robinshack
Octode
 
robinshack's Avatar
 
Join Date: Jun 2010
Location: Spalding, Peterborough, Cambridgeshire, UK.
Posts: 1,558
Default Re: Assorted tools, crimp, nut drivers, hole punches, spanners & other bits

OK Steve Bell, punches (3), (6), (7) & (9), yours as well. I will contact again in a few days, in case any of my to-be- offered items tempt you!
Rob
__________________
I am also interested in and collect 00 model railway. My avatar is Bruiser, he has cauliflower ears!
robinshack is offline  
Old 3rd May 2021, 5:43 pm   #10
Electronpusher0
Octode
 
Join Date: Jun 2016
Location: Bognor Regis, West Sussex, UK.
Posts: 1,552
Default Re: Assorted tools, crimp, nut drivers, hole punches, spanners & other bits

I'd like the solder suckers please.

Peter
Electronpusher0 is offline  
Old 3rd May 2021, 6:18 pm   #11
robinshack
Octode
 
robinshack's Avatar
 
Join Date: Jun 2010
Location: Spalding, Peterborough, Cambridgeshire, UK.
Posts: 1,558
Default Re: Assorted tools, crimp, nut drivers, hole punches, spanners & other bits

OK Electronpusher0, solder suckers, yours as well. I will contact again in a few days, in case any of my to-be- offered items tempt you!
Rob
__________________
I am also interested in and collect 00 model railway. My avatar is Bruiser, he has cauliflower ears!
robinshack is offline  
Old 4th May 2021, 8:29 am   #12
G6ONEDave
Heptode
 
G6ONEDave's Avatar
 
Join Date: Dec 2019
Location: Owston Ferry, North Lincolnshire, UK.
Posts: 762
Default Re: Assorted tools, crimp, nut drivers, hole punches, spanners & other bits

I would like the following hole punches please: 1, 4, 5, 8, 10 and 11.

Dave
__________________
Quote "All is hyperthetical, until it isn't!" (President Laura Roslin, Battleship Galactica)
G6ONEDave is offline  
Old 4th May 2021, 8:50 am   #13
robinshack
Octode
 
robinshack's Avatar
 
Join Date: Jun 2010
Location: Spalding, Peterborough, Cambridgeshire, UK.
Posts: 1,558
Default Re: Assorted tools, crimp, nut drivers, hole punches, spanners & other bits

OK G6ONEDave, those cutters are, yours. I will contact again in a few days, in case any of my to-be- offered items tempt you!

I have a few more bits I will photograph and post here later.
Rob
__________________
I am also interested in and collect 00 model railway. My avatar is Bruiser, he has cauliflower ears!
robinshack is offline  
Old 4th May 2021, 10:05 am   #14
robinshack
Octode
 
robinshack's Avatar
 
Join Date: Jun 2010
Location: Spalding, Peterborough, Cambridgeshire, UK.
Posts: 1,558
Default Re: Assorted tools, crimp, nut drivers, hole punches, spanners & other bits

Update. Prices are as in first post.
Only Items now left unclaimed are:
Pic 1 Neutral blocks
Pic 2 The Elco blue pin tool
Pic 4 The metric spanners. 185g Note, post for these is as large letter. 1.75 OR, added to another parcel.
Pic 5 The metal punches Just #2 (5/8") and #12 (16.5mm) left

Added now are some trimming tools. See picture. A & B all are used. The right hand white hex one in "A" only has one tip. There are 6 sets available of item C. All look new and unused. Some were supplied years ago as part of a spares kit for radios.
These will be a large letter, less than 100g to post, 1.20 or include within another parcel.


Later today I have some Components to add, but I will start a new thread. As these are small and light, they could be posted within any of the other above tools parcels to save postage cost.
Rob
Attached Thumbnails
Click image for larger version

Name:	DSCF0002.jpg
Views:	71
Size:	66.7 KB
ID:	233230  
__________________
I am also interested in and collect 00 model railway. My avatar is Bruiser, he has cauliflower ears!

Last edited by robinshack; 4th May 2021 at 10:07 am. Reason: correction
robinshack is offline  
Old 4th May 2021, 10:50 am   #15
G6ONEDave
Heptode
 
G6ONEDave's Avatar
 
Join Date: Dec 2019
Location: Owston Ferry, North Lincolnshire, UK.
Posts: 762
Default Re: Assorted tools, crimp, nut drivers, hole punches, spanners & other bits

OK, I fell for it! Please add 2 sets of item C (2.50) in the trimmer tools. My long type trimmers are just about worn out now, thanks.

Dave
__________________
Quote "All is hyperthetical, until it isn't!" (President Laura Roslin, Battleship Galactica)
G6ONEDave is offline  
Old 4th May 2021, 11:23 am   #16
mickm3for
Hexode
 
Join Date: May 2015
Location: Chatham, Kent, UK.
Posts: 495
Default Re: Assorted tools, crimp, nut drivers, hole punches, spanners & other bits

Hi could i have a and c please Mick
mickm3for is offline  
Old 4th May 2021, 11:36 am   #17
robinshack
Octode
 
robinshack's Avatar
 
Join Date: Jun 2010
Location: Spalding, Peterborough, Cambridgeshire, UK.
Posts: 1,558
Default Re: Assorted tools, crimp, nut drivers, hole punches, spanners & other bits

OK, G6ONEDave and mickm3for, all reserved.
So, now on the trimming tools, just B left and 3 of C.
Rob
__________________
I am also interested in and collect 00 model railway. My avatar is Bruiser, he has cauliflower ears!
robinshack is offline  
Old 4th May 2021, 12:49 pm   #18
Reelman
Octode
 
Reelman's Avatar
 
Join Date: Aug 2008
Location: Rotherham, South Yorkshire, UK.
Posts: 1,168
Default Re: Assorted tools, crimp, nut drivers, hole punches, spanners & other bits

Hi Rob,
Can I please have:

The metal punches #2 (5/8") and #12 (16.5mm)
1 x set C trimming tools

I’ll watch for further entries/posts

Many thanks,

Peter
Reelman is offline  
Old 4th May 2021, 1:40 pm   #19
robinshack
Octode
 
robinshack's Avatar
 
Join Date: Jun 2010
Location: Spalding, Peterborough, Cambridgeshire, UK.
Posts: 1,558
Default Re: Assorted tools, crimp, nut drivers, hole punches, spanners & other bits

Ok Reelman, those will be yours.
Are you aware that 5/8" is 15.88mm?
Let me know if you only want one punch, otherwise all metal punches now gone.
Trimming tools "B" and 2 lots left of trimming tool "C" left from my last offered post earlier today.
Rob
__________________
I am also interested in and collect 00 model railway. My avatar is Bruiser, he has cauliflower ears!

Last edited by robinshack; 4th May 2021 at 1:43 pm. Reason: typo and update on available items
robinshack is offline  
Old 4th May 2021, 3:09 pm   #20
Reelman
Octode
 
Reelman's Avatar
 
Join Date: Aug 2008
Location: Rotherham, South Yorkshire, UK.
Posts: 1,168
Default Re: Assorted tools, crimp, nut drivers, hole punches, spanners & other bits

Yes, thought it was close. Both though please.
Many thanks,
Peter
Reelman is offline  
Closed Thread

Thread Tools



All times are GMT. The time now is 4:15 am.


All information and advice on this forum is subject to the WARNING AND DISCLAIMER located at https://www.vintage-radio.net/rules.html.
Failure to heed this warning may result in death or serious injury to yourself and/or others.


Powered by vBulletin®
Copyright ©2000 - 2021, vBulletin Solutions, Inc.
Copyright ©2002 - 2021, Paul Stenning.