|
|
|
|
|||||||
| Vintage Test Gear and Workshop Equipment For discussions about vintage test gear and workshop equipment such as coil winders. |
 |
|
|
Thread Tools |
24th Jan 2014, 10:03 pm
|
#21 |
|
Octode
Join Date: Dec 2008
Location: Wincanton, Somerset, UK.
Posts: 1,780
|
Re: Tektronix Oscilloscope 453 Allen Key
Yes, every knob on a 453 requires a 1/16" allen key, apart from the largest! (Which is the time/div knob), which uses two 50 thou at 90 degrees.
The 1.3mm in this low-cost set will fit, and they're good quality. http://cpc.farnell.com/pro-s-kit/8pk...set/dp/TL03270 John |
|
