UK Vintage Radio Repair and Restoration Powered By Google Custom Search Vintage Radio Service Data

Go Back   UK Vintage Radio Repair and Restoration Discussion Forum > General Vintage Technology > Cabinet and Chassis Restoration and Refinishing

Notices

Cabinet and Chassis Restoration and Refinishing For help with cabinet or chassis restoration (non-electrical), please leave a message here.

Reply
 
Thread Tools
Old 4th May 2020, 3:08 pm   #1
ChristianFletcher
Hexode
 
ChristianFletcher's Avatar
 
Join Date: Dec 2003
Location: South Yorkshire, UK.
Posts: 402
Default Plywood and veneers maximum temperature

I bought a really nasty looking woodworm infested radio. I don’t plan on hiding the extremely distressed state of the radio but instead try to make a feature out of the damage.


Now I am planning on using heat treatments to kill the woodworm but does anyone know at what temperature the plywood will delaminates or the veneer lift. From my studies 50c will kill most bugs and 62c everything. I was going to put it in the oven for 8hrs as is recommended

Depending on how bad and soft the cabinet is I will probably inject it with epoxy and reinforce the interior using epoxy if required

I know that this distressed look isn’t to many people’s liking but I think it will make an interesting experiment etc. Fingers crossed it will be as totally awful as the pictures suggest.

Thanks Regards Chris
Attached Thumbnails
Click image for larger version

Name:	1FE30E9B-E2A3-4762-9901-9286C10115A7.jpg
Views:	109
Size:	103.1 KB
ID:	204876   Click image for larger version

Name:	0A85E391-9B27-49F2-A4C1-69BFED4CC6A9.jpg
Views:	98
Size:	110.9 KB
ID:	204877   Click image for larger version

Name:	B5517E22-65E9-4346-8A5B-CBDFDFE32ACA.jpg
Views:	98
Size:	117.8 KB
ID:	204878  
__________________
Every Silver Lining Has Its Cloud !
ChristianFletcher is offline   Reply With Quote
Old 4th May 2020, 3:14 pm   #2
Cobaltblue
Dekatron
 
Cobaltblue's Avatar
 
Join Date: Dec 2010
Location: Exeter and Poole, UK.
Posts: 3,680
Default Re: Plywood and veneers maximum temperature

That looks like a Masteradio D110W

Nice little set I prefer the wood to the Bakelite version.

I would be interested in how your experiment works out I suspect its gonna be close to melting the cow glue holding the case together.

Cheers

Mike T
__________________
Don't care if it was a bargain why's it in my kitchen
Mike T BVWS member.
www.cossor.co.uk
Cobaltblue is offline   Reply With Quote
Old 4th May 2020, 3:19 pm   #3
ChristianFletcher
Hexode
 
ChristianFletcher's Avatar
 
Join Date: Dec 2003
Location: South Yorkshire, UK.
Posts: 402
Default Re: Plywood and veneers maximum temperature

Thanks Mike.

I’m not afraid to use chemicals but there is a lot of debate as to both the effectiveness and if drying out the wood is good enough. But the heat method will kill the worm just unsure will the cabinet’s survive the process.

Unless it’s at the costly extreme end of the Art Deco styling I find Bakelite dull brown and entire unappealing but it’s good we all like different things. Oops that’s me excommunicated!
__________________
Every Silver Lining Has Its Cloud !

Last edited by ChristianFletcher; 4th May 2020 at 3:24 pm.
ChristianFletcher is offline   Reply With Quote
Old 4th May 2020, 3:53 pm   #4
merlinmaxwell
Dekatron
 
merlinmaxwell's Avatar
 
Join Date: Jul 2008
Location: Maidenhead, Berkshire, UK.
Posts: 9,262
Default Re: Plywood and veneers maximum temperature

Freezing it will also kill any grubs left, which I doubt there are.
__________________
Cats have staff, it's dogs that have owners.
merlinmaxwell is online now   Reply With Quote
Old 4th May 2020, 4:41 pm   #5
David G4EBT
Dekatron
 
David G4EBT's Avatar
 
Join Date: Feb 2003
Location: Cottingham, East Yorkshire, UK.
Posts: 4,066
Default Re: Plywood and veneers maximum temperature

They’re ‘flight holes’ where - after the grubs spent maybe four years devouring the timber internally turning into ‘frass’, the fine dust that is their excrement - they pupated into adult beetles and bored their way out to carry on their brief life cycle to meet, mate, infest more timber then die.

Some may argue that ‘it’s better to be safe than sorry’, and will use ‘woodworm killer’ or other means, but unless the holes have clean white holes and signs of recent frass, they will have departed many decades ago. It would be a remarkable coincidence, having infested timber covered with so many flight holes, for those holes to have been so recent that there are still a few stragglers in there, which have yet to emerge. You can always put it in a clear plastic bags for a week or two to see if any beetles or frass emerges.

Unfortunately the wood isn’t really ‘wood’ any more - it has no structural integrity and could easily be snapped to reveal a cloud of dust.

The beetles look for timber with 15% or higher moisture content in which to lay their grubs, and may find those conditions in a damp shed, but not in a modern home.

Every good wish whatever you do with it Chris.
__________________
David.
BVWS Member.
G-QRP Club member 1339.
David G4EBT is online now   Reply With Quote
Old 4th May 2020, 6:51 pm   #6
ChristianFletcher
Hexode
 
ChristianFletcher's Avatar
 
Join Date: Dec 2003
Location: South Yorkshire, UK.
Posts: 402
Default Re: Plywood and veneers maximum temperature

Thanks for great replies


I think I need to assume it’s still alive with worm and treat it according just be safe etc. Yes it may just turn into a pile of dust LOL. I’m trying to look into some of the salvage websites and restorations some people like this vintage wood. There are paint on chemical treatments that soak into the wood and make it go hard etc. If it’s really bad I was thinking of laying fibre glass on the inside so it in effect has a new internal support structure. It’s very much an experimental project. I just really like the distress of the finish on this radio. I will keep you all posted etc

I know a bit about woodworm etc but I just read a long thread article on here, even where evidence is produced there appears to still be widespread disagreement etc. Some say furniture beetle is happy in dry timber. Have to see how it goes a bit of charring May add to the effect etc.



Thanks Regards Chris
__________________
Every Silver Lining Has Its Cloud !
ChristianFletcher is offline   Reply With Quote
Old 4th May 2020, 7:30 pm   #7
merlinmaxwell
Dekatron
 
merlinmaxwell's Avatar
 
Join Date: Jul 2008
Location: Maidenhead, Berkshire, UK.
Posts: 9,262
Default Re: Plywood and veneers maximum temperature

Quote:
paint on chemical treatments that soak into the wood and make it go hard etc. If it’s really bad
They will kill any bugs too.
__________________
Cats have staff, it's dogs that have owners.
merlinmaxwell is online now   Reply With Quote
Old 4th May 2020, 8:32 pm   #8
David G4EBT
Dekatron
 
David G4EBT's Avatar
 
Join Date: Feb 2003
Location: Cottingham, East Yorkshire, UK.
Posts: 4,066
Default Re: Plywood and veneers maximum temperature

For anyone so inclined, these links will help to gain an informed understanding based on facts rather than opinions about the life-cycle of what is commonly called 'furniture beetle' (Anobium Punctatum), though the beetles themselves do no damage, which is why we refer to it as 'woodworm' - the 3 - 5 year larval stage of the beetle's life cycle, which causes all the damage. After mating, the pregnant female lays her eggs in high moisture content timber, then dies. There's no evidence of an infestation until the grubs pupate and exit the timber, by which time the damage is done.

https://www.timberwise.co.uk/2008/03...-the-woodworm/

https://buildingconservation.com/art...m/woodworm.htm

https://en.wikipedia.org/wiki/Common_furniture_beetle

Incidentally, it's sometimes been claimed that woodworm can be killed by placing a radio cabinet in a freezer. Well yes, if the freezer will go down to Minus 20C. The preferred 'home' for beetles is in the sapwood of felled timber with a high moisture content. It gets well below freezing in forests and the grubs can cope well with that.

BVWS members may have seen the first part of an article in the Spring 2020 Bulletin by Gary Tempest, who skilfully restored a cabinet what had had woodworm.
__________________
David.
BVWS Member.
G-QRP Club member 1339.
David G4EBT is online now   Reply With Quote
Old 4th May 2020, 10:07 pm   #9
TrevorG3VLF
Octode
 
TrevorG3VLF's Avatar
 
Join Date: Apr 2011
Location: Matlock, Derbyshire, UK.
Posts: 1,367
Default Re: Plywood and veneers maximum temperature

The Natioal Trust suggested that the wood be put in the freezer for a week or two. I use a pump oil can to inject woodworm killer and when dryed out, i inject 50/50 white spirit/ boiled linseed oil. When this has dryed out, I do it again. This puts some strength into even powdered wood. Quick drying varnish may also work.
The holes are then filled and I have never seen any new ones.
__________________
If I can help somebody as I travel along
Then my living shall not be in vain.
TrevorG3VLF is online now   Reply With Quote
Old 5th May 2020, 7:37 am   #10
The Philpott
Nonode
 
Join Date: Aug 2016
Location: Colchester, Essex, UK.
Posts: 2,175
Default Re: Plywood and veneers maximum temperature

'They' love plywood, and an infestation can last for longer than in any other timber, perhaps 5 or 6 years. The damage seen on the surface represents 1/30th of the real damage inside, and the base pictured will be on the point of disintegration, saved up until now only by the inherent strength of the plies!
I prefer cold treatment to hot treatment. Wood hardener (not particularly cheap) in a tin is great stuff, as long as it penetrates deep enough it could save the integrity of the base. It may change the colour of the wood slightly but i don't think this will worry you here..

B&Q, for example, are still open (and relatively safe) but are not taking cash. If you needed to get food or fuel i can't see that combining journeys is against the spirit of the emergency legislation.

I have a feeling the cabinet may start to break up when the guts are removed- perhaps a coat of hardener applied from the outside before gutting it ?

Dave
The Philpott is offline   Reply With Quote
Old 5th May 2020, 11:33 am   #11
Mullard_Nut_74
Tetrode
 
Join Date: Mar 2020
Location: Sydney, New South Wales, Australia.
Posts: 59
Default Re: Plywood and veneers maximum temperature

i really like the look of it.
i would be tempted to fill the holes with a dark wood filler and give the whole thing a light sanding.
Then use a redish purple guitar stain on it.
Then coat the whole thing in resin allowing the first few coats to be a slow drying product that would soak right in.
Would be a great project and could turn out really nice when finished.
Keep us updated on the process you do use and plenty of pics along the way.

Neil
__________________
If only he could have used his evil genius for niceness instead of evil. Max Smart 18 Sept 1965
Mullard_Nut_74 is offline   Reply With Quote
Reply

Thread Tools



All times are GMT +1. The time now is 7:58 pm.


All information and advice on this forum is subject to the WARNING AND DISCLAIMER located at https://www.vintage-radio.net/rules.html.
Failure to heed this warning may result in death or serious injury to yourself and/or others.


Powered by vBulletin®
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
Copyright ©2002 - 2020, Paul Stenning.