UK Vintage Radio Repair and Restoration Powered By Google Custom Search Vintage Radio Service Data

Go Back   UK Vintage Radio Repair and Restoration Discussion Forum > General Vintage Technology > Where To Get Sets and Parts

Notices

Where To Get Sets and Parts For discussions about swapmeets, rallies, NVCF and BVWS, car boot sales, antique and charity shops, dealers, newspaper adverts, the local tip and just about any other source of equipment (other than eBay).

Reply
 
Thread Tools
Old 12th Nov 2017, 10:44 am   #81
'LIVEWIRE?'
Dekatron
 
'LIVEWIRE?''s Avatar
 
Join Date: Mar 2006
Location: N.W. Oxfordshire(Chipping Norton)
Posts: 5,281
Exclamation www.tubesandmore.com

I haven't personally dealt with this company, but a browse of their website shows that they stock a wide range of components which would be useful to those who repair & restore vintage radios, etc., and to the guitar fraternity. They are based in the USA, but will ship internationally, though the cost of shipping and the delivery times involved varies widely. A number of options are mentioned on site.
Amongst other things they stock are Electronic Vibrators to replace the mechanical types used in 1950s car radios, Electrol;ytic and other capacitors, including dual & multiple can-types, Grille Cloth, knobs, including 'chicken head' types, potentiometers in various spindle types, etc., etc. One caveat is that any switched potentiometers are likely only to be single pole types made for 120v AC mains. Go to www.tubesandmore.com for further details. The site is headed 'Antique Electronic Supply
'LIVEWIRE?' is offline   Reply With Quote
Old 12th Nov 2017, 1:38 pm   #82
'LIVEWIRE?'
Dekatron
 
'LIVEWIRE?''s Avatar
 
Join Date: Mar 2006
Location: N.W. Oxfordshire(Chipping Norton)
Posts: 5,281
Default Re: Recommended Component Suppliers.

I forgot to mention that www.tubesandmore.com also stock the type of grommets used to mount record player motors. They sell them in packs of ninefor (U.S.)$6.75, which works out at 75c. (about 60p) each (subject to carriage charges and possible VAT of course.
'LIVEWIRE?' is offline   Reply With Quote
Old 15th Nov 2017, 7:58 pm   #83
electronicstec
New Member
 
Join Date: Nov 2017
Location: Sheffield, South Yorkshire, UK.
Posts: 1
Default Bardwell Electronics stock.

www.myelectronicstec.com

Re Bardwell electronics. We worked with Bardwell electronics for nearly two years. we arranged to purchase all the stock of parts from valves, to transistors, transformers and much more.

If you are looking for radio parts feel free to call us on 01143605355 or send us an email to info@myelectronicstec.com

We could not see 70 odd years of stock go to the tip. All the Bradwell stock has been saved. Please pass the word on as we have millions of parts.

Regards

Kev

Last edited by Station X; 15th Nov 2017 at 8:10 pm. Reason: Title change.
electronicstec is offline   Reply With Quote
Old 16th Nov 2017, 12:06 am   #84
turretslug
Nonode
 
Join Date: Nov 2011
Location: Surrey, UK.
Posts: 2,058
Default Re: Recommended Component Suppliers.

That's excellent news! Well done, and thanks for posting.
turretslug is offline   Reply With Quote
Old 16th Nov 2017, 5:39 pm   #85
cathoderay57
Diode
 
Join Date: Oct 2017
Location: Bristol, UK.
Posts: 6
Default Re: Recommended Component Suppliers.

Hi folks,

I have received very good value from:-

http://bright-components.co.uk/

Caps suitable as cathode decouplers, and some hi-voltage poly film caps useable for valve gear.

Antique Electronic Supply:-

https://www.tubesandmore.com/

Is based in the USA so we Brits have the penalty of postage from the land of Uncle Sam but they do have a large stock of hard to get parts geared towards guitar amp applications.
cathoderay57 is offline   Reply With Quote
Reply

Thread Tools



All times are GMT. The time now is 11:45 am.


All information and advice on this forum is subject to the WARNING AND DISCLAIMER located at https://www.vintage-radio.net/rules.html.
Failure to heed this warning may result in death or serious injury to yourself and/or others.


Powered by vBulletin®
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Copyright ©2002 - 2017, Paul Stenning.